News for hackers. Stuff that matters.
Re:Re-creating Disney's sodium vapor process featuring Paul ... by jiggawatts on Monday April 08, 2024 @10:56PM (#39975878)
The original beamsplitter cube isn't some exotic custom device that would cost tens of thousands to make.

It's just a dichroic beamsplitter, which is a standard optical element available from online sellers. Variants of these are commonly sued in scientific experiments, optical devices, etc...

Here's one for under $300: https://www.meetoptics.com/beamsplitters/plate/longpass-dich...

Just search for: "589 nm beamsplitter".

Re:Re-creating Disney's sodium vapor process featuring Paul ... by laserbeam on Tuesday April 09, 2024 @12:07AM (#39976115)
I can't find any that are prism shaped (in the short time I spent on the website). I don't actually know what kind of manufacturing challenges you get if you want to place these splitters at the center of a prism.

However, I'd guess these are the components the guys are using between the prism and the cameras.

Re:Re-creating Disney's sodium vapor process featuring Paul ... by rerdavies on Tuesday April 09, 2024 @03:03AM (#39976824)
Presumably, the exotic part of the beamsplitter is that the dichroic filter must be a bandpass filter with a very narrow passband around 596nm. Yours is a high-pass filter, which wouldn't work for this application.
Re:Re-creating Disney's sodium vapor process featuring Paul ... by eurekin on Tuesday April 09, 2024 @04:54AM (#39977492)
So, a second beamsplitter with low-pass filter wouldn't cut it?
Re:Re-creating Disney's sodium vapor process featuring Paul ... by lightedman on Tuesday April 09, 2024 @08:40AM (#39978775)
Nope, you need a notch filter.
Re:Re-creating Disney's sodium vapor process featuring Paul ... by Tally on Tuesday April 09, 2024 @06:25PM (#39984991)
I mean, a bit more searching did seem to turn up a few notch beamsplitters near the required frequency (not quite the same frequency though)

I am wondering if part of the reason that finding these at the frequency of sodium vapour lamps is partly due to those lights no longer being common. Or perhaps that those just aren't frequencies common to laser optics, which seems like the biggest market for these kinds of devices anyway.

Though, I see no reason why you couldn't use a laser for this process anyway, with matching notch filter.

Re:Re-creating Disney's sodium vapor process featuring Paul ... by delfinom on Saturday April 13, 2024 @11:19AM (#40023668)