Re:How I Replaced Deadly Garage Door Torsion Springs
by bumby on Monday March 18, 2024 @05:49PM
(#39750470)
At least according to the article, the main failure mode is fatiguing, so I’m not sure lube would help with that, unless the corrosion is really bad. Most materials have a finite amount of cycles in them (although I’m a bit skeptical of the authors 7 year estimate…it seems low to me)
[ Parent
| on HN ]
Re:How I Replaced Deadly Garage Door Torsion Springs
by linsomniac on Monday March 18, 2024 @06:39PM
(#39750905)
Doesn't the rubbing of the coils against each other contribute to fatigue?
Re:How I Replaced Deadly Garage Door Torsion Springs
by manfre on Monday March 18, 2024 @09:22PM
(#39752064)
Yes, it does.
Re:How I Replaced Deadly Garage Door Torsion Springs
by mildchalupa on Monday March 18, 2024 @09:11PM
(#39751980)
Roughly 30k cycles is typical.
You can certainly design a spring to have infinite life. But it requires reducing average deflection, aka more spring with less deflection per turn.
Re:How I Replaced Deadly Garage Door Torsion Springs
by bumby on Tuesday March 19, 2024 @05:12PM
(#39760258)
The article claims a 10k cycle limit for common-grade torsion springs (but again, I'm skeptical). You can design a spring to have infinite life. Still, you must constrain yourself to specific materials (steel and titanium being the most common) because most materials don't have an infinite life on an S-N curve.