News for hackers. Stuff that matters.
Re:How I Replaced Deadly Garage Door Torsion Springs by linsomniac on Monday March 18, 2024 @01:18PM (#39747137)
Nobody seems to mention keeping the springs lubed for longevity. What's the groups thinking on that? I keep a spray bottle of lube by the door and shoot it every few months, which is probably overkill, but it's so easy. Then just wipe off the excess and grime maybe yearly.
Re:How I Replaced Deadly Garage Door Torsion Springs by zdragnar on Monday March 18, 2024 @01:59PM (#39747715)
Might help with corrosion, too. My grandfather had a very old garage door and opener, and one day something gave and it blew apart. It sounded very much like a shotgun had been fired inside the garage.

Fortunately, nobody was in or near the garage when it happened, but I'll remember it every time "garage door spring" comes up in conversation.

Re:How I Replaced Deadly Garage Door Torsion Springs by ToucanLoucan on Monday March 18, 2024 @05:44PM (#39750428)
We had a corroded one that still functioned but I finally buckled under the RACKET the thing made every time the door opened and closed and got it replaced anyway.

Every single time you opened or closed it, it sounded like a goddamn car crash going on out front. Ugh.

Re:How I Replaced Deadly Garage Door Torsion Springs by bumby on Monday March 18, 2024 @05:49PM (#39750470)
At least according to the article, the main failure mode is fatiguing, so I’m not sure lube would help with that, unless the corrosion is really bad. Most materials have a finite amount of cycles in them (although I’m a bit skeptical of the authors 7 year estimate…it seems low to me)
Re:How I Replaced Deadly Garage Door Torsion Springs by linsomniac on Monday March 18, 2024 @06:39PM (#39750905)
Doesn't the rubbing of the coils against each other contribute to fatigue?
Re:How I Replaced Deadly Garage Door Torsion Springs by manfre on Monday March 18, 2024 @09:22PM (#39752064)
Yes, it does.
Re:How I Replaced Deadly Garage Door Torsion Springs by mildchalupa on Monday March 18, 2024 @09:11PM (#39751980)
Roughly 30k cycles is typical. You can certainly design a spring to have infinite life. But it requires reducing average deflection, aka more spring with less deflection per turn.
Re:How I Replaced Deadly Garage Door Torsion Springs by bumby on Tuesday March 19, 2024 @05:12PM (#39760258)
The article claims a 10k cycle limit for common-grade torsion springs (but again, I'm skeptical). You can design a spring to have infinite life. Still, you must constrain yourself to specific materials (steel and titanium being the most common) because most materials don't have an infinite life on an S-N curve.
Re:How I Replaced Deadly Garage Door Torsion Springs by Scoundreller on Monday March 18, 2024 @07:17PM (#39751219)
Don't just lube the springs, take the cover off the opener and grease up the nylon gears. The grease eventually dries out and then the gears turn into dust.

Here's the DIY video I followed to overhaul it when that eventually happened: https://www.youtube.com/watch?v=qE3GTc1h5N0