[0] https://en.m.wikipedia.org/wiki/Assembly_of_the_Internationa...
Then look at expected reusable launch cost and figure out how many HSTs or JWSTs we could have put in orbit for the same cost.
We'll be able to design modular space telescopes that benefit from economies of scale, so that we'll be shipping up the sun shield in separate pieces anyways so if any particular one is lost that's okay we'll have an assembly line to produce more.
Unfolding the heat shield was a relatively minor design issue compared to say the instruments, we just had less ability to actually test it on the ground.
The benefit of starship here is probably being able to massively reduce the expense and risk of future JWST duplicates that don't need to fold. Also in the launch cost, which was $1 billion for Ariane 5 whereas Starship would be in the tens of millions.
Apollo LM: 16 metric tons (landing about 5 tons on the moon)
Apollo CSM: 29 metric tons
The third stage of the Saturn V, called the S-IVB, (which was used for the trans-lunar injection burn) weighed 123 tons - however this was also used to get into the initial orbit.
Starship can launch 150 tons to LEO in reusable mode or ~200 mt when expended. The Saturn V was able to launch 141 tons to LEO. So it should theoretically be possible for Starship to launch an LM+CSM stack with an S-IVB with enough fuel for a trans-lunar injection burn. Then fly the rest of the mission as in Apollo.
Or we can refuel the Starship a few times in LEO using a bunch of re-usable flights and land 100 tons of payload on the lunar surface. The latter is probably cheaper and simpler at this point.
Six... eight... more like twelve... at least 15