News for hackers. Stuff that matters.
Re:Welding of Plutonium (1958) [pdf] by euroderf on Sunday February 18, 2024 @03:58AM (#39417405)
Why the heck are we welding plutonium ?
Re:Welding of Plutonium (1958) [pdf] by mike256 on Sunday February 18, 2024 @05:07AM (#39417771)
Because some people think the world needs nuclear weapons :-(
Re:Welding of Plutonium (1958) [pdf] by thsksbd on Sunday February 18, 2024 @06:51AM (#39418313)
We conceded that part. The question is: What about nuclear weapons needs welding?
Re:Welding of Plutonium (1958) [pdf] by PaulHoule on Sunday February 18, 2024 @07:12AM (#39418413)
According to

https://discover.lanl.gov/publications/national-security-sci...

    Pieces of cast plutonium are then welded together to form a pit
Note if the world (ex. Russia) ever gets interested in the fast breeder reactor, or even if we try to get the absolute most out of the LWR

https://www.neimagazine.com/features/featurean-advanced-fuel...

there may be revived interest in casting fuel elements out of mixed U, Pu and Zr like so

https://www.youtube.com/watch?v=KEfhx5ovuYk

a technology which has been quietly used in marine nuclear reactors for years. This competes with the oxide fuels ordinarily used in civil LWRs and that the French have developed to make mixed-oxide (part U, part Pu) fuels. Problem with that is that quality MOX fuel is made of U and Pu alloyed in a high-energy ball mill but that makes nano particles that are highly effective at getting in your lungs and causing cancer. That is a problem with casting too, but making MOX fuel means you need to pick up fuel pellets with gloves and carefully stuff them in a tube whereas you don’t have to get anywhere near a cast fuel rod.

Re:Welding of Plutonium (1958) [pdf] by danbruc on Sunday February 18, 2024 @05:17AM (#39417837)
Was wondering the same, I would not have expected welds in places where plutonium is used and assumed things like casting, forging, and machining is what you do to plutonium. Maybe this was just for research, just in case the need ever arises? Or for experimental setups?
Re:Welding of Plutonium (1958) [pdf] by chainingsolid on Sunday February 18, 2024 @08:22AM (#39418837)
Addative manufactering (welding) has the advantage of working towards a critical mass. Where as subtractive requires getting even closer to it then moving away from it, as you make the desired part.
Re:Welding of Plutonium (1958) [pdf] by danbruc on Sunday February 18, 2024 @11:15AM (#39420241)
Interesting point but would that really be relevant? If you have a hollow pit or one with an initiator in the center, you will be making two half-spheres, so you will be far away from the critical mass. And even if you are making a solid pit, I would have assumed that you are quite a bit away from the critical mass without neutron reflectors and the compression from the detonation.
Re:Welding of Plutonium (1958) [pdf] by icegreentea2 on Sunday February 18, 2024 @02:18PM (#39422128)
I think you'd want to weld the two half spheres together to give a more consistent mechanical fit to help with your implosion efficiency.