1. https://docs.espressif.com/projects/esp-idf/en/latest/esp32/... 2. https://www.amazon.com/HiLetgo-Lossless-Digital-Converter-Ra...
[1]: https://www.aliexpress.com/item/1005006104038963.html?spm=a2...
What are the problems with it for audio? The microphones and speaker on this and the T-Embed [1] suggest it's partly intended for that.
I mean you can absolutely build a shoutcast stream receiver with it. Or run a NES emulator with sound on it. But this ttgo device seem like it would be best as a console or maybe a mastodon front-end. In that case the most the speaker would make sense for would be some beeps.
Next best is using Bluetooth, depending on what you’re trying to build.
The total amount of readers is probably higher than you think, 80% are lurkers.
The total amount of purchasers ass a percentage is probably lower than average, due to cynacism and skeptacism.
The back of the phone can be replaced with a custom PCB or breadboard holding your custom hardware. Pogo pins make a connection to the motherboard. The idea is you could carry whatever you end up making around in your pocket just like a phone once you're done, assuming you only put components on the inside of the back cover.
Disclosure: I designed and manufacture it.
BUT. What I'm still missing is an audio jack. I've been searching for a long time now for a device of this mobile friendly form factor (i.e. battery support), with a couple of buttons and knobs, a small display and audio in/out.
Like a TE Pocket Operator, but fully programmable (using typical C++/Rust/Micropython programming environments).
I'd really love to deep dive into rapid prototyping some audio generator or effect processor I can take with me, but don't want to design and build a device for this first.
Maybe you guys have seen something like this before and can give me a hint?