Re:Apollo 11 vs. USB-C Chargers (2020)
by nothercastle on Tuesday December 26, 2023 @11:12PM
(#38779026)
Exactly this. A lot of the systems had built in analog computers. It’s a lot cheaper to build then now with electronics but you need more computing power to do things that were previously done mechanically
[ Parent
| on HN ]
Analog computers have to be rebuilt if it turns out the program is wrong though, don’t they?
Re:Apollo 11 vs. USB-C Chargers (2020)
by coder543 on Tuesday December 26, 2023 @11:48PM
(#38779186)
In the context of this thread, I believe even a digital computer would have to be rebuilt if the program is wrong... :P
Unless you typically salvage digital computers from the wreckage of a failed rocket test and stick it in the next prototype. If the FCC is wrong, kaboom.
Re:Apollo 11 vs. USB-C Chargers (2020)
by scaredginger on Wednesday December 27, 2023 @12:07AM
(#38779277)
I'm pretty sure you can perform tests and find defects without actually flying the rocket
Re:Apollo 11 vs. USB-C Chargers (2020)
by Tommstein on Wednesday December 27, 2023 @12:07AM
(#38779278)
Presumably they meant a program being discovered to be wrong before the computer was actually launched. And meant literally building a whole new computer, not just recompiling a program.
Re:Apollo 11 vs. USB-C Chargers (2020)
by hinkley on Wednesday December 27, 2023 @12:17AM
(#38779317)
Yeah, though to be fair, some of the programs Apollo ran were on hand woven ROMs, so I may be making too fine a distinction. The program itself was built, not compiled. It if we are comparing with today, it would just be installed, not constructed.
For the Apollo Guidance Computer, changing the program meant manually re-weaving wires through or around tiny magnet rings. A good part of the cost of the computer was the time spent painstakingly weaving the wires to store the program.
Re:Apollo 11 vs. USB-C Chargers (2020)
by neodypsis on Wednesday December 27, 2023 @01:11AM
(#38779537)
There's a very nice video about the assembly lines MIT made just for building the Apollo computer [0].
Re:Apollo 11 vs. USB-C Chargers (2020)
by denton-scratch on Wednesday December 27, 2023 @10:05AM
(#38782634)
Pardon me, but why would you have to re-weave wires around magnetic rings? The magnetic rings are for storing data; the whole point is that you can change the data without rewiring the memory. If you have to re-wire permanent storage (e.g. program storage), that's equivalent to creating a mask ROM, which is basically just two funny-shaped sheets of conductor. There's no need for magnetic rings.
No, I'm not talking about magnetic core memory. Core rope memory also used little magnetic rings.
https://en.wikipedia.org/wiki/Core_rope_memory input wires were energized, and they were coupled (or not) to the output wires depending on if they shared a magnetic ring (or not).
Re:Apollo 11 vs. USB-C Chargers (2020)
by denton-scratch on Wednesday December 27, 2023 @02:29PM
(#38785579)
Thanks! I'd never heard of rope memory.
Re:Apollo 11 vs. USB-C Chargers (2020)
by garaetjjte on Wednesday December 27, 2023 @01:30PM
(#38784936)
Re:Apollo 11 vs. USB-C Chargers (2020)
by hinkley on Wednesday December 27, 2023 @06:13PM
(#38788024)
Because it’s not RAM, it’s ROM.
Re:Apollo 11 vs. USB-C Chargers (2020)
by Anarch157a on Wednesday December 27, 2023 @01:16PM
(#38784769)
Only if the bug was caught after the computer had been assembled for the mission. For development, they used a simulator. Basically, a cable connected to a mainframe, with the bigger computer simulating the signals a bundle of core rope would produce.
Re:Apollo 11 vs. USB-C Chargers (2020)
by nothercastle on Wednesday December 27, 2023 @09:38AM
(#38782323)
I had assumed it meant more simple things like balanced balancing pneumatic or mechanical components that always put you at the the correct ratio sort of like a carburetor vs fuel injection.
Re:Apollo 11 vs. USB-C Chargers (2020)
by nothercastle on Tuesday December 26, 2023 @11:48PM
(#38779182)
Yes though they tend to be mechanically tuned. So like a pneumatic computer or will get tuned to operate into some range of inputs and you probably bench prototype it before you mass produce it
Typically they were reprogrammed by changing the jumpers. The analogous digital change would be replacing the band of cards in a jaquard loom.
Much less than “rebuilding”.
There have been some hybrids too.