Clrly yu hve never usd this on the bands.
Yes, the error correction is between the operator ears. It is not a mode that can easily automated.
CW is wonderful, but is has long since been superseded by more modern digital modes.
You can easily use a transmitter with Gaussian keying to reduce the sidebands to zero.
The sidebands in CW ARE the information.
> When the key is down there is no modulation whatsoever.
No, but you can't keep the key down forever. The information is in the transition from Key-down to Key-up (and Vice/versa). Which is why the modulation envelope has to be tailored to the keying speed, else you get excessive key clicks.
> You can easily use a transmitter with Gaussian keying to reduce the sidebands to zero.
Gausian keying requires a Raised-Cosine envelope. It is this which contains the sidebands and the information, and causes the B/W to be widened.
"On the receive side, you can make your receiver as narrow at the transmitters oscillator". Completely wrong, and shows a fundamental misunderstanding.
Morse is a wonderful mode, but suffers from the lack of error correction which had made modes like PSK31 and FT8 so much more effective, especially in bandwidth usage.