When your math starts requiring relativistic physics, it's a lot easier and cheaper to just run some fiber.
https://en.wikipedia.org/wiki/Hanbury_Brown_and_Twiss_effect
The two options are to keep those offsets under control (i.e., lock everything to a common clock) or to rapidly measure the offsets as they change and try to compensate in software (difficult).
(Another at first surprising thing is that radiation received from celestial sources is only coherent because of their very small apparent size -- the sources themselves are not coherent at all, because their physical size is very large)
I admire the guy for having as much fun with his failures as his successes.
I focus more on maximizing what i can get out of a simple hardware setup, which means skipping anything that involves complex digital analysis or extremely sophisticated and sensitive equipment; it means more time having fun and less time debugging problems where I actually don't know enough to debug the problem.
Is there a better frequency available to amateur hardware that would give tolerance within more reasonable limits?
Without a shared external clock reference, i.e. over longer distances, how expensive does the hardware get if you want to be able to accurately measure the time/phase wandering to correct in software?
Just curious if it’s a limit of the low cost RTL-SDR or if it’s a harder problem than that (or both?).
Over longer distances, this is an active area of research with many different approaches for various applications.
Two recent well-known examples are the "Event Horizon Telescope" (the network of radio telescopes that has been generating images of black holes) and optical frequency combs (a recent demo published in Nature achieved time-transfer accuracy of a few femtoseconds).
[0]: https://www.rtl-sdr.com/rtl-sdr-blog-v-3-dongles-user-guide/...
The accuracy needs to be within about 1/10th of a period, give or take. I'm not sure the min/max frequency range for this system, but I saw 1.4 GHz in a screenshot, which would yield a tolerance of about 0.1 * (1 / 1.4 GHz) = 70 picoseconds.
That is achievable with the right hardware, but unfortunately the RTL-SDR doesn't include an option to use an external clock reference. As a result, each dongle's ADC sample timing and RF synthesizer phase will constantly be wandering relative to the others. It's not a one-time calibration; it's an ongoing random walk that changes on a millisecond-by-millisecond basis.
In theory you might be able to pull it off if you had a separate emitter in view of each antenna, calibrate each unit based on that signal, and then synchronize everything in software. But at some point it's easier to just use hardware that has an external clock input, and avoid the whole problem.