Dough (formerly Eve) Spectrum monitors have this feature. They are also great all-round monitors.
Dell monitors all support DDC, I'm not sure if KVM switching can be controlled over DDC but it's likely.
Somewhat unrelated, but some of the Dell monitors also have USB-C support, where a single USB-C cable connects to your laptop and: charges it (Power Delivery from the monitor), hooks up the display (DP alt mode), and connects to the USB hub on the monitor. So if you use a wireless kb/mouse with receivers plugged into the monitor, you'll have literally just 2 cables on your desk - a power cable for your monitor, and a USB-C cable between the monitor and laptop.
- the laptop to the side is awkwardly positioned for zoom chat, so you probably want a webcam as well
- audio is a problem. If you use bluetooth and swap lots of things over then you keep needing to re-pair which is a pain. The model I have (Dell UltraSharp 27 USB-C Hub Monitor - U2722DE) has an audio jack but this is for connecting to soundbars not headphones, and the soundbars Dell offered that are compatible with that monitor don't support headphones. So, I ended up using a USB headset. You can use bluetooth with a usb soundcard dongle to avoid swapping, but bidirectional sound is an issue with that so you'll want to use the mic on the webcam (if you got one like that)
My keyboard/trackball are wired to the monitor, there doesn't seem to be much point to having wireless to attach something that's only a foot away anyway.
Either way, it's one connection to the laptop, but 4-5 other things need to connect to the monitor too. Still pretty good and not too much clutter tho
I have a desktop Linux PC but I often need to switch to my MacBook. If I plug the MacBook in, all my peripherals automatically switch to it. If I unplug, everything switch he's back to the Linux PC.
You can definitely use DDC to switch inputs, and the KVM is linked to the selected input. On MacOS I use Better Display which lets me switch inputs from a menu bar app. On linux there is ddcui (which is more like a proof of concept than a polished app, but it works). It's rare that I need to use this though since the auto-switching is usually all I need.
They do. Here's my shell function that helps me switch between DisplayPort-1 + USB uplink cable to the host AND USB-C cable with DisplayPort Alt Mode+Charging+uplink to display's USB hub.
# x0f: DisplayPort-1
# x1b: USB-C
DDC_SOURCES=("x0f" "x1b")
switchkvm() {
local vcp_input_src="x60"
local current next src
current=$(ddcutil -t getvcp ${vcp_input_src} | awk '{ print $4 }')
for src in "${DDC_SOURCES[@]}"; do
if [[ ${src} != "${current}" ]]; then
next=${src}
fi
done
if [[ -z ${next} ]]; then
echo "No eligible alternate input in \$DDC_SOURCES" >&2
echo "\$DDC_SOURCES=(${DDC_SOURCES[*]}); current=${current}"
return 1
fi
ddcutil setvcp "${vcp_input_src}" "${next}"
}I had a KVM switch with a wired button (place KVM out of the way, put small button on your desk). The button was connected via a 3.5mm "audio" jack. I never measured the interface, but I bet it just connected two rings of the jack.
Using a switch like that, you can build your own control for it without opening the KVM. Either with an ESP for wifi control (MQTT would be my choice) or a smaller board for USB/serial control (Cortex-M dev board). Short the proper rings via an optocoupler controlled by the MCU and it will behave as if you pressed the button.
Like sibling comment, I have a 4-port USB switch with a remote that connects via micro-usb, it was quite easy to hack a custom remote that I keep next to my keyboard.
https://www.aliexpress.com/item/1005005149590635.html
is probably what you need. It has a USB port linked to a USB serial internally that you send strings to switch. It was designed to be used with the Pi KVM/BLIKVM KVM over IP solution but works for other things as well.
I wrote simple scripts to switch my monitor inputs with keyboard shortcuts (even simpler with Lunar, amazing new Mac app — https://lunar.fyi), which saved me from having to press annoying input-source buttons.
But I couldn't for the life of me find a simple, suitable software controllable KVM switch. That still requires the hardware button to be controlled, so frustrating.