News for hackers. Stuff that matters.
Re:Bambu Owners Woke Up Yesterday to Find Their 3D Printers ... by gumballindie on Saturday August 19, 2023 @11:24AM (#37189688)
Why on earth do 3D printers need a cloud connection, but most importantly why do people buy them?
Re:Bambu Owners Woke Up Yesterday to Find Their 3D Printers ... by baz00 on Saturday August 19, 2023 @11:29AM (#37189751)
Bastards and idiots in that order.
Re:Bambu Owners Woke Up Yesterday to Find Their 3D Printers ... by parsimo2010 on Saturday August 19, 2023 @12:00PM (#37190073)
Bambu had a pretty big marketing campaign with their printers. All the major reviewers/influencers in the 3d printing community were provided review samples, and presumably talking points to emphasize. Most all reviews focused on the high print speeds and advanced technology in the printers.

Things like the nearly required cloud integration were glossed over with "that's normal today and you get so many shiny features with it" and hardly anyone challenged Bambu by saying that most of the features enabled by cloud integration didn't really need the cloud to be implemented. Things like immature firmware were glossed over with comments like "there are some bugs but that can be fixed over time, so just go ahead and assume that this young company without a proven track record will provide good support to these printers."

Add the marketing to the consideration that there were no other pre-built "fast" printers when the Bambu printers hit the market. Your only other option was to build your own like a Voron, which many people didn't want to do. Now there are other pre-built options that don't require cloud integration, so people can really weigh the pros/cons of the other options, but Bambu got an advantage by being first to market.

Re:Bambu Owners Woke Up Yesterday to Find Their 3D Printers ... by f001 on Saturday August 19, 2023 @02:51PM (#37191844)
What would you recommend as an alternative pre-built “fast” printer?
Re:Bambu Owners Woke Up Yesterday to Find Their 3D Printers ... by parsimo2010 on Sunday August 20, 2023 @07:30AM (#37198141)
If cloud connectivity concerns you, the only pre-built option I’d recommend is Prusa. The mk4 isn’t as fast as Bambu’s printers, but that is a trade you will have decided on. I’d still put the mk4 in the “fast” category. The mk4 is completely open source. Prusa is the most reputable company in terms of trustworthiness.
Re:Bambu Owners Woke Up Yesterday to Find Their 3D Printers ... by gamblor956 on Saturday August 19, 2023 @03:05PM (#37192000)
This is completely wrong...

When the Bambu came out, there was nothing like it on the market that combined price, speed, and ease-of-use. Yes, there were cheaper printers, and faster printers, and easier-to-use printers, but not in a single package, and especially not in a pre-built package.

Things like immature firmware were glossed over

The "immature" firmware is still better than the "mature" firmware Creality ships. And Prusa shipped buggy firmware for its multi-material addon for several years, despite being in the 3d printing game for over a decade.

Bambu got an advantage by being first to market.

Bambu's first printer came out last year. The Anker Make came out before it. Creality and Prusa have been shipping 3d printers for a decade. Voron has been a thing for about a decade. What is this "first to market" advantage you speak of?

Re:Bambu Owners Woke Up Yesterday to Find Their 3D Printers ... by blibble on Saturday August 19, 2023 @04:29PM (#37192825)
> When the Bambu came out, there was nothing like it on the market that combined price, speed, and ease-of-use. Yes, there were cheaper printers, and faster printers, and easier-to-use printers, but not in a single package, and especially not in a pre-built package.

are they hoping to monetise you in a future update?

continued use? $19.99/month

Re:Bambu Owners Woke Up Yesterday to Find Their 3D Printers ... by gamblor956 on Saturday August 19, 2023 @06:13PM (#37193843)
I'm not sure what you're getting at. There's no subscription cost for using the cloud update, and it's possible to control the printers over WiFi using open source slicers.

So it appears you're angry about a strawman that doesn't actually exist.

Re:Bambu Owners Woke Up Yesterday to Find Their 3D Printers ... by blibble on Saturday August 19, 2023 @07:23PM (#37194364)
> There's no subscription cost for using the cloud update

... yet

Re:Bambu Owners Woke Up Yesterday to Find Their 3D Printers ... by parsimo2010 on Sunday August 20, 2023 @07:42AM (#37198194)
Bambu X1 started shipping in July 2022 when their Kickstarter wrapped up. AnkerMake M5 started shipping in August. Bambu was first.

Voron is a kit or diy. Creality printers that were available at the time were not fast like the Bambu. Their K1 came later.

I wrote that at the time Bambu was the first to have a pre-built fast 3d printer. That is the first to market (the pre-built fast printer market) that I was talking about.

I don’t know how you say I was wrong, because everything you “corrected” me was in my previous post.

Re:Bambu Owners Woke Up Yesterday to Find Their 3D Printers ... by sudosysgen on Saturday August 19, 2023 @01:22PM (#37190975)
The main feature is being able to remotely check up on your 3D prints and cancel them if they've gone wrong as well as being able to print remotely. These are actually fairly useful which is why people do buy them, though you could make it work without cloud connections.
Re:Bambu Owners Woke Up Yesterday to Find Their 3D Printers ... by gumballindie on Saturday August 19, 2023 @01:56PM (#37191346)
A lan connection and a raspberry pi will do that just fine. Plugin a webcam and the USB connector of the printer. Been doing this >10 years ago and i was able to upload print models, monitor progress, and cancel. Use USB hubs if you have more than one printer.
Re:Bambu Owners Woke Up Yesterday to Find Their 3D Printers ... by anonymousab on Saturday August 19, 2023 @02:36PM (#37191712)
It is completely doable, and there's a lot of good software and tutorials to get it done. But there's all sorts of things that could complicate that process.

For instance, with my last 3d printer, I had to open it up and jump some pins on the mainboard, and then had to get a specific piece of (cheap and readily available) USB hardware to write to it from a laptop - and even then, it only worked from a specific USB port on some of my machines, because of weird USB host incompatibilities. And my 3d printer was one of the most common buy-this-one-first products of its time!

Oh, and there was also some weirdness with the PSU as well that somehow caused flakiness when powering up the webcam when I tried to share power for the pi with the printer itself. I'm comfortable with troubleshooting that, but I wouldn't expect nor even want the average person to have to bother with that kind of stuff.

So the appeal/marketing of the Bambu products is that it's not something for tinkerers - it's something that the average person can just setup and immediately get reliable prints, with all the bells and whistles on top of it.

In other words, the idea is that it (quite literally) "just works". Even with the drawbacks that we all know about proprietary devices and cloud services, it does its job for the average person.

The positive side of all this is that Bambu's relative success means a bit of pressure on the other leaders in the 3D printing space, and we can see that they're all iterating quickly and well to compete in aspects where they may have been resting on their laurels before.

Re:Bambu Owners Woke Up Yesterday to Find Their 3D Printers ... by Etrnl_President on Saturday August 19, 2023 @09:08PM (#37195006)
> I had to open it up and jump some pins on the mainboard, and then had to get a specific piece of [hardware]

I had to do that for almost every new game and hardware upgrade on my old 386. Welcome to the club, pal.

Re:Bambu Owners Woke Up Yesterday to Find Their 3D Printers ... by Filligree on Saturday August 19, 2023 @02:11PM (#37191490)
And then you also set up a VPN connection to your phone, mess with certificates and whatnot? Though you’ll also need to use some form of cloud system to get past CGNAT, since you probably have that on both ends. My ISP hasn’t provided IP addresses in years.

Most people just want a printer, not two new hobbies.

Re:Bambu Owners Woke Up Yesterday to Find Their 3D Printers ... by jrockway on Saturday August 19, 2023 @02:33PM (#37191678)
Why do you want to operate your printer when you're not on your LAN? I certainly have no control over my printer (other than the power switch) from the Outside World. I consider this to be a security feature.
Re:Bambu Owners Woke Up Yesterday to Find Their 3D Printers ... by anonymousab on Saturday August 19, 2023 @02:38PM (#37191736)
> Why do you want to operate your printer when you're not on your LAN?

Checking the progress of your prints remotely and stopping them if something has gone wrong. There's options for spaghetti detection and so on, but those aren't perfect, and other kinds of failures can happen.

Re:Bambu Owners Woke Up Yesterday to Find Their 3D Printers ... by jrockway on Saturday August 19, 2023 @03:27PM (#37192227)
I don't leave the house when I have something printing. You can't extinguish a fire with a remote power switch.
Re:Bambu Owners Woke Up Yesterday to Find Their 3D Printers ... by sudosysgen on Saturday August 19, 2023 @05:28PM (#37193412)
The point of these printers is to be reliable and accessible enough that you don't have to worry about that, just like you don't worry about supervising your drier.

Just like most appliances, a 3D printer will only catch fire in the case of a serious hardware malfunction or egregious user error. The point is for this to be rare enough that the risk is negligible, so all you'd worry about is your print failing.

Re:Bambu Owners Woke Up Yesterday to Find Their 3D Printers ... by nomel on Saturday August 19, 2023 @10:44PM (#37195572)
Considering many of my prints are multi day, this is just silly. I can’t stay home for days. I put my printer in a place where it’s free to burn completely. Any other way is not safe. Safety is about prevention, not attention.
Re:Bambu Owners Woke Up Yesterday to Find Their 3D Printers ... by gumballindie on Saturday August 19, 2023 @08:59PM (#37194950)
Ngrok does the trick. It's straightfoward. And people that do 3D printers are usually happy to hack a bit here and there.
Re:Bambu Owners Woke Up Yesterday to Find Their 3D Printers ... by PLG88 on Sunday August 20, 2023 @01:58AM (#37196539)
zrok.io is a nice open source alternative with free SaaS if you are interested. I work on the project.
Re:Bambu Owners Woke Up Yesterday to Find Their 3D Printers ... by sudosysgen on Saturday August 19, 2023 @02:32PM (#37191670)
The point is that you don't want this to just be on LAN, you would want to be able to this from anywhere. That way if you're at work or going out you can still do that. If you wanted it to just be on LAN, you can just disable the cloud features, but for many people that's a big selling point.

You can make it work over the internet without a cloud connection, but it's fiddly and requires set-up (port forwarding or hole punching). People don't want that, and Bambu's value proposition is zero-tweaking at high performance - otherwise you'd go for another model.