But that would be loud. You don't want attention when breaking in. (Unless you are a fucked up junkie not caring about anything anymore)
But yes, my parents for example are paranoid about always locking the front door 2 times(and get angry if I don't do it when I visit), but have a glass door in the back. There are also glass cutters.
"Raking house locks is a) not difficult and b) not expensive. You don't need to be a professional to do that"
But you do have to make some investment. They are illegal to purchase (in most places), I would not know, where to start looking. And then you have to learn to use them. And I know someone who did play with those a bit - yet he still could not enter my door at all. So it is a barrier.
Pre-Covid, it didn't matter if you were loud. You and your neighbors were all off at work all day. So long as a thief felt confident there was no alarm to trigger, they could make all the racket they wanted and no one would hear.
Today, it's a little more risky but of the half dozen houses on my street I'd probably only hear one getting broken into and that's only if I were downstairs. Our homes aren't on especially large lots either (7-10k sq ft).
That said, just because people have low-security locks on their house doesn't mean that better options aren't available. I have Medeco locks. They are harder to pick than what you get at the hardware store. So far, no break-ins from lockpickers! Also, I'll sell you a rock that keeps tigers away.
Lockpicks are legal almost everywhere in the US.[0] Even in places where they aren't legal, they're not exactly difficult to obtain, given that a perfectly adequate rake can be made from any key that fits the target lock, and there are only ~3 keyways in common residential use.
amazon. Not much of an investment needed https://www.amazon.com/Stainless-Steel-20-School-Toolbox/dp/...
(It is indeed cheap)
Dog owner gets up, yells at dog to shut up... because rain!
They've tried various blanks, and I've never gotten a satisfactory explanation from any of them. It's possible all my local locksmiths are inexpert.
The pins in new locks have pretty tight tolerances for the first couple years until they wear a bit. Its likely they are just using older equipment which isn't sufficiently precise to cut them. Get a key that is exactly right, and works with a bit of wiggling, use it as your primary key for a couple months and it will work just as well as the originals. The slight variations in the key ways/etc will knock the edges off the pins with enough use. Assuming the key is cut correctly from the right blank, you might just need a bit of lube/oil on the key. If you can see variations by eye in the ramps/etc its likely the key is just wrong.
But also, bricks through windows are equally not difficult and not expensive, though they do leave a bit more evidence. When my neighbors have been burgled, this is the preferred method of entry I've seen.