Suppose we have 1Hz signal, what stopping us from sending/receiving 10 or 100 bits of info every second by modulationg amplitude of signal?
See https://en.wikipedia.org/wiki/Amplitude_modulation#Spectrum
Modulated signal could be expressed as sum of signals with different frequencies, but will it be registered by receiver as signal at these frequencies?
Suppose we send 1hz signal with length = 1 hour. In the middle we change amplitude of one wave to 1/2. Does recievers recieves mix of different frequencies?
No need for higher frequency content. But SNR will have to be good enough.
Shannon's limit tells you about the total information capacity of a channel given its bandwidth and SNR. This is usually achieved by using deeper modulation than theoretical, and using error-correcting codes to recover the lost data.
> This is not true and is unrelated to Shannon's theorem.
You are correct that it is unrelated to Shannon, but it is still true. The higher your carrier frequency the higher your theoretical maximum bandwidth (in the correct meaning, i.e occupied spectrum), you can never have negative frequencies, so modulation the maximum bandwidth you can modulate a 1Hz to is 2 Hz (modulation bandwidth extends to positive and negative frequencies). A 10 Hz carrier can be modulated to 20 Hz...
> Shannon's theorem shows us that wider bandwidths allow for larger bit rates. At higher frequencies our bandwidths can be bigger. For example a band from 1 to 2 terahertz is 1 terahertz wide, which is 1000 times larger than a band from 1 to 2 gigahertz (1 gigahertz wide).
So you are contradicting yourself? Not sure why you said the earlier statement is not treu?
This is not true and is unrelated to Shannon's theorem.
Shannon's theorem shows us that wider bandwidths allow for larger bit rates. At higher frequencies our bandwidths can be bigger. For example a band from 1 to 2 terahertz is 1 terahertz wide, which is 1000 times larger than a band from 1 to 2 gigahertz (1 gigahertz wide).
The total bandwidth available (including multiple channels) for 2.4 GHz Wi-Fi is about 100 MHz. The total space available for this new standard is 800 to 1000 nm [0], which is 450 THz. That's 4.5 million times wider than Wi-Fi. That is why you get higher bit rates with this new standard, AKA more throughput, or more "bandwidth", when the term is used to mean data rate.
[0]: https://standards.ieee.org/ieee/802.11bb/10823/