[1] https://toolkit.climate.gov/topics/transportation-and-supply...
[2] https://thelincolnite.co.uk/2015/07/kink-in-track-freight-tr...
https://www.itv.com/news/anglia/2022-07-19/why-cant-uk-roads...
Unintuitively, parts of the London underground are notorious for being extremely hot. Especially the central line is super hot due to the material the tunnels are dug into being an extremely good insulator/heat store.
https://www.forbes.com/sites/lauriewinkless/2017/06/22/sweat...
Use ice-based AC for the passengers, not heat pumps dumping into the tunnels.
Change the breaking resistors to not be on the train, but the rectifier stations, and make them vent outside. Or change them to dump heat into what's a big insulated kettle that gets filled with ice or at least disposes the resulting hot water outside, not hot air into the tunnels.
> Compressive forces result from stresses induced in a constrained rail by temperature above its "stress free" state, and from mechanical sources such as braking, rolling friction and wheel flanging on curves. The temperature of the rail at the "stress-free" state is known as the rail neutral temperature (i.e. the temperature at which the rail experiences zero longitudinal force). Initially, the rail's installation temperature or "anchoring temperature" is the rail's neutral temperature. Hence, at rail temperatures above the neutral, compressive forces are generated, and at temperatures below the neutral, tensile forces are developed. Track maintenance practices address the high thermal load problem by anchoring the rail at (neutral) temperature of 95 -110 F. This high neutral temperature range prevents the generation of excessively high buckling forces even when the rail temperatures reach 130 -150 F.
https://www.volpe.dot.gov/infrastructure-systems-and-technol...
Some railroads that experience wide summer vs. winter temperature differences may choose to install expansion joints. Like most things, there are trade-offs, like increased maintenance costs and increased chance of derailment at the joint.