News for hackers. Stuff that matters.
Re:Automating the capture of airplane pictures with Raspberr... by tpmx on Thursday May 11, 2023 @11:30AM (#35903584)
Does anyone know of any (perhaps open source) hardware that's suitable to aim a DSLR-sized camera in a suitable direction with a reasonable kind of precision? I guess medium power (around 10-20W?) BLDC motors combined with an hall effect sensor would be suitable for this application since they are used in gimbals?

It would be neat to have an auto-aiming and tracking camera with a telephoto lens and record a close-up video of the aircraft instead of a wide angle photo.

Re:Automating the capture of airplane pictures with Raspberr... by dekhn on Thursday May 11, 2023 @11:53AM (#35903974)
I've done this but for observing the sun with a DSLR/telephoto for long periods. I've seen several projects to do this, a related project is https://opensamofficial.github.io/OpenSAM/ but that's more of a stabilizer.

When I built my own I hit a number of challenges: the 3d printed plastic parts melted in the sun (switched from PLA to PETG, printed in pure white). DSLRs with telephotos are heavy so I ended up using gearing. I should have put more time into balancing the camera to reduce the motor demands. I don't think a DSLR is ideal- I'd much rather use a small, cheap industrial camera, but I've never found the equivalent of an affordable 300mm telephoto that is C-mount and goes on industrial camera. I used stepper motors, not BLDC, without feedback (other than a zero-position limit switch) and a simple realtime algorithm for pointing; it worked, but wasn't really good enough to make the sunspot timelapses I wanted.

I think for this it makes more sense to buy a quality telescope motorized mount, a nice refractor telescope, and then put a DSLR at prime focus. It'd be about $3K but would save a lot of time compared to DIY.

Re:Automating the capture of airplane pictures with Raspberr... by tpmx on Thursday May 11, 2023 @12:06PM (#35904183)
I didn't think about the heat. Yeah, a DSLR with a decent lens is quite heavy. And expensive, so it needs to be protected.

It's a tricky problem to do on the cheap.

I don't think I'm prepared to spend $3K, my idea was rather to spend some fun time on HW work as a diversion from the regular paid SW work - and to put some use to that expensive camera gear I'm not really using.

Thanks for your lessons learned; they have been helpful!

Re:Automating the capture of airplane pictures with Raspberr... by dekhn on Thursday May 11, 2023 @12:22PM (#35904438)
Do you have a 3d printer? Spend some time cloning this: https://www.bhphotovideo.com/c/product/689699-REG/Giga_Pan_E...

That's what I did. This time around, I'd just buy that.

Re:Automating the capture of airplane pictures with Raspberr... by gavinsyancey on Thursday May 11, 2023 @12:57PM (#35904920)
Might be worth looking into motorized telescope mounts. Should have plenty of precision, although you might not be able to slew very fast and will probably have to handle zoom/focus/camera control separately. Looks like people have built and documented open-source telescope mounts, or you can buy a cheap one for a couple hundred dollars.
Re:Automating the capture of airplane pictures with Raspberr... by MandieD on Thursday May 11, 2023 @02:37PM (#35906362)
The steerable rotors amateur radio operators use with large directional antennas might be of interest. The EME (Earth-Moon-Earth) and radio satellite communities in particular have many automated antenna rotation solutions.