News for hackers. Stuff that matters.
Re:How to Get Started in Soldering for Beginners by someweirdperson on Monday April 10, 2023 @09:44AM (#35512190)
> It’s a metal alloy comprised of tin and lead (often 60 percent tin and 40 percent lead) used to bond items together.

No more lead in the EU, with few exceptions.

Re:How to Get Started in Soldering for Beginners by smiley1437 on Monday April 10, 2023 @10:04AM (#35512439)
Learning on lead-free nearly turned me off of soldering until a buddy gave some Kester eutectic, that is a freaking joy compared to lead-free
Re:How to Get Started in Soldering for Beginners by CarVac on Monday April 10, 2023 @10:38AM (#35512873)
Lead-free is fine.

Lead-free with poor quality flux is abhorrent to use.

Get good quality lead-free with good flux from a reputable manufacturer (Kester is good, as you mentioned) and it's fine.

In fact, I prefer how thin and quick to wet out SAC305 is over the lower melting point of Sn63Pb37.

Re:How to Get Started in Soldering for Beginners by danieldk on Monday April 10, 2023 @01:55PM (#35515166)
I have made quite a few keyboards (including handwired) and a few other electronics projects with lead-free solder and it has never been an issue. I use lead-free solder with a resin core, set the iron to the recommended temperature, and make sure to tin the tip.
Re:How to Get Started in Soldering for Beginners by nsheridan on Monday April 10, 2023 @10:04AM (#35512445)
Lead solder is totally attainable for hobbyists - I bought a 100g spool a few weeks ago.
Re:How to Get Started in Soldering for Beginners by Havoc on Monday April 10, 2023 @10:48AM (#35512992)
Yeah tbh I’d rather struggle a bit more than have lead in the mix. Lead is for life
Re:How to Get Started in Soldering for Beginners by userbinator on Monday April 10, 2023 @08:12PM (#35519043)
If you're getting lead poisoning from soldering, you're doing it very, very wrong...