News for hackers. Stuff that matters.
Re:IBM creates 9nm carbon nanotube transistor that outperfor... by wcoenen on Thursday January 26, 2012 @08:51AM (#3514071)
How do they get the carbon nanotube in the correct position and orientation like that? I suspect it will be difficult to do it reliably and cheaply for billions of transistors at a time.
Re:IBM creates 9nm carbon nanotube transistor that outperfor... by johapers on Thursday January 26, 2012 @12:15PM (#3514935)
I apologize if this is a bit long:

The answer can be found in the supplementary information to the article here: http://pubs.acs.org/doi/suppl/10.1021/nl203701g/suppl_file/n...

In short, they grew the nanotubes on a quarts crystal, transferred them with tape quite randomly to gates already made on a Si-wafer and then etched and metalized around these gates. They then tested a large amount of devices to find ones where a nanotube of the right kind (semiconducting) had placed itself in a correct alignment with the gate and metalized contacts (source and drain). Once they knew what devices were working they imaged some of the working devices with an Atomic Force Microscope (AFM) and did a bunch of standard transistor measurements.

As was commented earlier, the specific growth of nanotubes in a well defined position is not easily achieved. There is IMO a long time until anyone can do a full chip where nanotubes grow exactly where one wants the transistors. It might even be that graphene is a more convenient technology for just this reason (since graphene can be grown somewhat more conveniently by annealing SiC wafers). A side note I guess is that growing nanotubes and pillars vertically can be done in specific spots on a wafer, but that makes manufacturing of the gate a bit problematic. And I do not know wheter carbon nanotubes can be grown selectively this way.

Re:IBM creates 9nm carbon nanotube transistor that outperfor... by adestefan on Thursday January 26, 2012 @11:09AM (#3514621)
Pfft. That's an engineering problem, not a research problem. I kid a bit, but IBM does have the fabrication engineering talent to pull it off.
Re:IBM creates 9nm carbon nanotube transistor that outperfor... by yvdriess on Thursday January 26, 2012 @10:10AM (#3514404)
The mass production of transistors is completely thanks to its relatively etching process. I wonder if we will see a relatively similar process for alternative transistor technology.
Re:IBM creates 9nm carbon nanotube transistor that outperfor... by foreverbanned on Thursday January 26, 2012 @11:04AM (#3514606)
They probably use an atomic force microscope (google "atomic force microscope nanomanipulation").
Re:IBM creates 9nm carbon nanotube transistor that outperfor... by sliverstorm on Thursday January 26, 2012 @11:09AM (#3514623)
Probably. There's a reason we are still using 32nm silicon, even though we can experimentally fabricate graphene & gallium-arsenide transistors at sizes down to... 6nm? (That's the smallest I remember.)