If I make a struct that has a 32 bit field followed by a 48 bit field, I might use a 64 bit load as part of getting the latter. But that doesn't make the field larger. It's an optimization because it's safe to overshoot.
It’s not a matter of what wizardry you can do in the high level languages to act like it’s a true 48 bits for the sake of speed/size in your data structures it’s a matter of what happens when the rubber hits the road and the CPU loads the address. One thing you can really do on x86 CPUs is run them in 64 bit mode (i.e. get the newer instructions and registers) but only use 32 bit addressing. This does actually go faster do to halving the address sizes, some examples can be found in the Linux kernel as the x32 ABI.
Putting the bits together into one register and doing the sign extension is a matter of arithmetic. It doesn't touch memory any more. You very much can do a 32 bit load and a 16 bit load and no other loads.
> you need to know what the first 16 bits are to see if the last 48 bits refers to the high or low portion
No you don't. That's not how the sign extending works. The top seventeen bits of the 64-bit value are all the same.
> what happens when the rubber hits the road and the CPU loads the address
The CPU will fetch an entire cache line, 128 bytes, but you only need to pull 6 bytes out of L1.
Then you can sign extend the upper bits and use your address as normal, to load any number of bytes from elsewhere in memory (maybe only one byte if you're feeling feisty).
Also you added the part about the register itself not being 48 bits to your previous comment after I replied, but I've never claimed the register was 48 bits. Just that it's effectively containing a 48 bit value. The reason I keep hammering on about sign extension is that you could put the same memory addresses into an 80 bit register, but it wouldn't make them 80 bit addresses. You're just using a register of arbitrary size to store a 48 bit signed number.
There is no 48 bit register nor can you make a 48 bit register via a 32 and 16 bit load, you'd still have a 64 bit register you wrote 48 bits into it's just you've assumed you're going to be using only the lower half of the mapping so 0x0000... is a valid sign-extension. If you were trying to access the other half of addressable memory that doesn't work though.
> No you don't. That's not how the sign extending works. The top seventeen bits of the 64-bit value are all the same.
The bits are the same if you want it to work but it's not the same thing as the bits being extended for you. You still actually have to load the sign extended bits i.e. if you put 0x0000F22... into the register and tell it to load the memory address it doesn't turn the memory address into 0xFFFFF22... for you. Your compiler or OS might be doing that on your behalf but the CPU does not. You will get an exception from the MMU if the memory address is not already sign extended when referenced. It may appears to work that way if you only ever work in user space where 0x0000... happens to extend the lower half for you if you don't set it but only half the memory is mapped in a way that holds true and it's still passing those 0's to the MMU (as again is evident if you set one of the bits to something else then try to call the address).
I think the rest follows with the above. It's not a matter of theory just create an assembly program that tries to load rax set to 0xFF0F...F20000 and compare it to one that tries to load rax set to 0xFFFF..F20000. One works, the other doesn't. The only explanation is the full value is being sent. If only 48 bits were sent to the MMU and it signed extended automatically 0xFF0F wouldn't create an exception. It's a 64 bit address where only 48 bits worth are legal, that's very different than a 48 bit address.
You need to shift some of the bits into place. If you shift the correct way it'll sign extend with 0x0000 or 0xffff as appropriate.
> it's not the same thing as the bits being extended for you
Yes you have to tell the CPU to sign extend. I wasn't trying to say otherwise. But you don't have to load those bits from anywhere. You only have to load 48 bits from memory.
> The only explanation is the full value is being sent. If only 48 bits were sent to the MMU
It's possible the verification happens pre-MMU, but either way as soon as those bits are verified they get discarded. Only 48 bits are used for any functionality.
> and it signed extended automatically
Well again I wasn't saying that. The program needs to ask for the sign extension.
> It's still possible the verification happens pre-MMU
It's also possible there is a teapot in orbit between Earth and Mars but as far as actual x86 CPUs they don't deal with MARs (memory address registers) which would have that kind of logic, which is probably a good thing given all the different memory modes multiplied by the number of registers you can use. There are AGUs in newer x86 CPUs (well at least Intel, I assume in AMD) which offload common memory offset calculations but they take and return the standard register load size.
That only 48 bits are only used for any functionality is a fair description though, assuming we're still excluding newer 57 bit CPUs. The main thing I was taking issue with was your initial statement "With 48 bits as a hard limit of what fits into a register" not how many bits of the register or memory address are functionally meaningful.
Oh, Oh!
That was a hypothetical talking about 48 bit CPUs that grew out of 12 bit CPUs.
That's why I said 384 tera-octets and something we would stick with.