News for hackers. Stuff that matters.
Re:ThinkPad 701C with a Framework brain transplant by monetus on Thursday February 23, 2023 @01:12PM (#34914238)
Think there is some sort of advantage they had by doing that rather than say, four screws at the ends of the PCB? Damage resistance? - Trying not to believe planned obsolescence was the priority.
Re:ThinkPad 701C with a Framework brain transplant by chis on Thursday February 23, 2023 @02:10PM (#34914940)
Would guess that it helps with keyboard flex. And rivets are cheaper than screws.
Re:ThinkPad 701C with a Framework brain transplant by ali7388 on Thursday February 23, 2023 @02:14PM (#34914993)
It is lighter and more robust. Screws may come loose.
Re:ThinkPad 701C with a Framework brain transplant by toast0 on Thursday February 23, 2023 @04:36PM (#34916840)
Rivets come loose too; but they're a lot harder to retighten.
Re:ThinkPad 701C with a Framework brain transplant by Brian_K_White on Thursday February 23, 2023 @07:00PM (#34918658)
When I spilled a drink on my Framework and ordered a new keyboard, I discovered it had 3 mis-aligned screws in the keyboard from the factory. Like either a hole was punched wrong or a screw was rammed in off center. The holes and threads are all messed up and impossible to tighen those screws.

3 out of 60 or more.

Never knew there was anything wrong from the outside but I can't imagine wouldn't have worked loose over more time if I hadn't happened to have a reason to uncover them in the first year.

I love that I was able to replace a keyboard, but 3 out of 60 is a pretty bad rate.

Re:ThinkPad 701C with a Framework brain transplant by djaychela on Friday February 24, 2023 @01:45AM (#34921632)
The 2012 era ones are screwed in place (I didn't know this until this weekend when I took one apart to that level). I've never known one come loose, and a properly torqued screw will never be a problem in this situation.
Re:ThinkPad 701C with a Framework brain transplant by loa_in_ on Thursday February 23, 2023 @02:15PM (#34915013)
I imagine more effective and faster assembly at production.
Re:ThinkPad 701C with a Framework brain transplant by djaychela on Friday February 24, 2023 @01:46AM (#34921640)
They're cheaper to make this way. It's not 4 screws in the earlier models, it's more like 100. Fitting those, even with a special mechanism will be more time consuming and problematic than riveting.

They don't care about repair. They are optimising solely for manufacturing.