News for hackers. Stuff that matters.
Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by ajsnigrutin on Tuesday January 10, 2023 @01:07PM (#34328918)
Even if you solved that, you'd still have problems with knives (you can't outlaw kitchen knives), homemade explosives, sticks, screwdrivers, acid, etc.

Mental health, crime, and drugs (also, again crime related to those), and you've solved most of the problems. Just legalizing some drugs would probably solve more than half of the issues in some places.

Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by bayesian_horse on Tuesday January 10, 2023 @01:37PM (#34329362)
It's much harder to kill people with a knife than with a gun.

In the US, mass shooters have killed a dozen or more victims in a minute or two. Very hard to achieve with anything else short of explosives.

Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by lazide on Tuesday January 10, 2023 @02:00PM (#34329713)
Good thing no one ever uses IEDs then…..
Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by bayesian_horse on Tuesday January 10, 2023 @08:38PM (#34333968)
As I said, short of "explosives" which IEDs need. And yes, IEDs are rarer than gun shootings pretty much everywhere, because explosives are a lot better restricted, even in the otherwise completely insane US. I guess some control works??
Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by lazide on Wednesday January 11, 2023 @02:43PM (#34343503)
There are explosives, as in actual regulated explosives, and then there are IEDs, which can use anything from repurposed old artillery shells, to stolen construction explosives, to mixed kitchen chemicals and fertilizer.

IEDs are not rarer than shootings because of controls, most likely. A Timothy McVeigh style attack is still very doable with off the shelf stuff.

Explosives were never okay in Iraq either, post-Saddam (or guns, for that matter). It didn’t stop IEDs being the #1 threat. Same with Ireland during ‘the troubles’. Guns are direct in application, limited in impact, and expose the wielder to direct harm. Explosives, don’t.

Explosives do require a degree of planning that a gun doesn’t though. And tend to be clearly ‘terrorist’/‘terrible’ in nature.

The crazy just hasn’t been bottled up enough for it to get there in the US. Yet, anyway.

Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by karaterobot on Tuesday January 10, 2023 @03:25PM (#34330972)
Look up vehicle ramming attacks. Easy to commit, hard to prevent, very effective from the mass murderer's perspective. For example, in 2016, an attack with a truck killed 86 people and wounded 458 in Nice. You can't stop people from mass murder if they have their mind set on it.

The best prevention would be figure out why they want to kill and solve the underlying issue, but that's too hard I guess. Strategies like "ban X" are an admission that we're not interested in root causes. Instead we pretend that removing the instruments or making the penalties worse will work. Predictably, all that will happen is people who want to commit mass murder will find other ways to do it.

Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by bayesian_horse on Tuesday January 10, 2023 @08:32PM (#34333917)
Not true. Such ramming attacks are actually quite rare. And even when they do occur, they usually cause far fewer accidents. It takes quite a bit of planning or even luck to pull off a significant victim count. In "practical terms" a lot can go "wrong", like people running or jumping away or obstacles stopping the vehicle. And even if not, the victims are rather random, which is often not what amok runners want.

Restricting access to guns has worked remarkably well pretty much everywhere. Turns out, the easier you make it to kill people, the more people get killed. And it's not like firearms have remotely as much legitimate use for average people like cars.

Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by amalgamated_inc on Friday January 20, 2023 @03:16PM (#34459196)
False.

One guy in Nice, France killed 86 and injured over 400 in a single attack. That's more deaths than every school shooting in the US since at least 2000, and 10x more injuries.

France also saw 128 dead in one night in nightclub shootings, so all their gun laws didn't do jack.

It is simply false that outlawing guns has reduced these deaths.

Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by Ancapistani on Tuesday January 10, 2023 @04:54PM (#34332099)
> It's much harder to kill people with a knife than with a gun.

This seems like a reasonable statement, but I don't think it's true.

If I had to be shot with a handgun from close range or stabbed with a kitchen knife, I would absolutely choose being shot. You're statistically far more likely to survive a shooting than an attack with a bladed weapon.

Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by bayesian_horse on Tuesday January 10, 2023 @08:36PM (#34333948)
Were did you pull that "statistic" out of?

There haven't been 641 "mass stabbings" in 2022 in the US. Plenty of people also get killed by shotgun. Still, shotguns probably aren't the worst offenders and that sounds like a total red herring when school children get dismembered by assault style rifles somewhat regularly.

Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by Turing_Machine on Tuesday January 10, 2023 @05:38PM (#34332540)
> In the US, mass shooters have killed a dozen or more victims in a minute or two. Very hard to achieve with anything else short of explosives.

That is absolutely not true.

https://en.wikipedia.org/wiki/2016_Nice_truck_attack

86 dead, 458 injured.

Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by bayesian_horse on Tuesday January 10, 2023 @08:45PM (#34334037)
Yes, you can jump straight to the one incident that caused more victims than an average mass shooting. Do you know any others? Why is that incident already 6 years ago? They seem to be few and far between... globally.

Because causing a high victim count with a vehicle attack is not impossible but hard. Which was my point, had you bothered to read my comment properly.

Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by Turing_Machine on Tuesday January 10, 2023 @09:37PM (#34334399)
> Yes, you can jump straight to the one incident that caused more victims than an average mass shooting. Do you know any others?

https://en.wikipedia.org/wiki/Happy_Land_fire (gasoline)

https://en.wikipedia.org/wiki/September_11_attacks (box cutters and airplanes)

https://en.wikipedia.org/wiki/Rwandan_genocide (some firearms, but mostly machetes).

There are plenty more, including a bunch of genocides that took place before firearms were even invented.

> Because causing a high victim count with a vehicle attack is not impossible but hard.

Sorry, that's simply not true. All you need is a large vehicle and a crowd.

Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by bayesian_horse on Tuesday January 10, 2023 @10:04PM (#34334558)
You are making my point: You are cherry picking incidents while ignoring the vast number of mass shootings. All I'm saying is it is easier to kill a lot of people with a proper gun. All the "counter examples" you give are everything but "easy". They take planning and a lot of effort. Mass shooters sometimes buy their gun on the day of the attack. Then all it takes is pulling a trigger.

And no, "all you need is a vehicle and a crowd" isn't true. In reality, most of these incidents end up with very few victims if at all. Turns out, a lot can go wrong with that "plan". There can be a lot of obstacles between a car and a crowd that make charging into it harder. Any bump and the car looses speed. Cars get stuck. Bigger vehicles aren't as easy to get a hold of or drive. So no, it's not as easy as with a gun, and that's why in actual reality, in the US amok runners choose firearms over vehicle pretty much every time, and everywhere else man slaughter by car isn't exactly an epidemic either.

Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by Turing_Machine on Wednesday January 11, 2023 @10:43AM (#34339687)
> All the "counter examples" you give are everything but "easy".

Nonsense.

There's nothing hard about renting a truck and driving it into a crowd.

> Bigger vehicles aren't as easy to get a hold of or drive.

Nonsense.

https://www.uhaul.com/

https://www.pensketruckrental.com/

Also, the Happy Land perpetrator literally walked down to the corner gas station and bought a gas can and a gallon of gas. No waiting. No ID. No background check.

Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by bayesian_horse on Wednesday January 11, 2023 @02:24PM (#34343224)
Yet, somehow all of these methods get used orders of magnitude less than firearms to commit mass murders. Both in the US and elsewhere.

The US isn't really my standard. In sane jurisdictions you actually need a special license for bigger vehicles. And those still aren't as easy to control as smaller cars, so I suspect you highly underestimate the difficulty involved in committing mass murder with a vehicle. Sure it's not impossible, but pulling a trigger is one heck of a lot easier.

People who try to commit amok runs with cars or trucks actually do get stuck quite often.

Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by Turing_Machine on Wednesday January 11, 2023 @04:53PM (#34345494)
You keep shifting the goalposts -- your original post specifically mentioned the US.

The issue here is that you think the problem is "this guy has a gun" rather than "this guy wants to kill a bunch of people". It's like trying to combat alcoholism by banning shot glasses.

I think we're done.

Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by JoeAltmaier on Tuesday January 10, 2023 @05:42PM (#34332573)
Or poison. Or vehicles. Or hacking safety devices (e.g. traffic lights). Or on and on.
Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by bayesian_horse on Tuesday January 10, 2023 @08:37PM (#34333959)
Not true. All those means of murder are way harder to pull off and are rarer. Also in most countries, even with gun control, so far as I can tell.
Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by closewith on Tuesday January 10, 2023 @01:15PM (#34329047)
Watching Americans try to justify gun culture and why it isn't the real problem is always baffling to me. I do wonder if you're expressing genuinely held beliefs or if your head is wilfully in the sand.
Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by yellowapple on Tuesday January 10, 2023 @02:50PM (#34330500)
The irony of your "head is willfully in the sand" remark in the context of an ever-widening hole in the effectiveness of gun control is thick enough to spread on toast.

"Gun culture" (whatever that actually means) is not the problem. The fact that the US is the least-developed of the "developed" world is the problem. The fact American income disparity and mental health are both deteriorating at a rapid pace is the problem. People kill each other (or, more commonly, themselves) here in the US - with or without guns - because they're broke, stressed the fuck out, and so desperate for any semblance of relief that they're driven to either put themselves out of the misery our capitalist system has thrust upon them or else lash out at the rest of the very society disenfranchising them.

Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by amalgamated_inc on Friday January 20, 2023 @03:13PM (#34459143)
Lol watching non-Americans and their Stockholm syndrome about their governments taking their rights away is always amusing to me.

If you don't have a gun you're not a citizen, you're a subject.

Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by VikingCoder on Tuesday January 10, 2023 @01:20PM (#34329117)
Have you looked into the statistics of how many people succeed in suicide, world-wide, from knives, homemade explosives, sticks, screwdrivers, vs. how many succeed in suicide from firearms?

I mean, have you?

If you haven't, then why would you bring them up as "problems"?

Or are you just spit-balling?

Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by kobalsky on Tuesday January 10, 2023 @01:45PM (#34329484)
Disclaimer: I'm not from the US.

I don't understand this importance of that metric. The US has a high suicide rate but there are EU contries with a much lower guns per capita that have similar suicide rate.

Sweden has a rate of 12.4 vs 14.5 suicides in the US per 100k people [1], yet the guns-per-100-persons in Sweden is 23.1 vs 120.5 in the US [2].

An undeducated glance of the numbers shows that people tend to hang themselves when guns are not readily available like in the US [3].

How much do you think suicide will drop in the US if you removed all weapons overnight?

[1] https://en.wikipedia.org/wiki/List_of_countries_by_suicide_r... [2] https://en.wikipedia.org/wiki/Estimated_number_of_civilian_g... [3] https://www.ncbi.nlm.nih.gov/pmc/articles/PMC2649482/

Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by VikingCoder on Tuesday January 10, 2023 @02:23PM (#34330121)
You haven't answered my question. What is the suicide rate from knives? You specifically brought up knives as a "problem." Your word.

What is the suicide rate from homemade explosives?

Sticks?

Screwdrivers?

You brought those up as "problems."

The evidence I have seen makes me believe that suicide in otherwise healthy individuals seems to be a fleeting goal. It's not as though someone becomes set upon their decision, and continues attempting it until they succeed, for the vast majority of people.

Thus, when someone has the temporary motive of suicide, and they have a firearm available, they tend to succeed. When they have a temporary motive of suicide, but they don't have a firearm available, they succeed less often.

I get that the burden would be on me to argue that perspective with evidence, and I'm not going to be able to provide it any time soon, and I apologize for that.

But since you brought up the "problems" of knives, homemade explosives, sticks, and screwdrivers, again, I have to ask - do you have any evidence that those are worth being described as "problems"?

Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by kobalsky on Tuesday January 10, 2023 @02:34PM (#34330271)
I failed to mention that I was not the original commenter.

> Thus, when someone has the temporary motive of suicide, and they have a firearm available, they tend to succeed. When they have a temporary motive of suicide, but they don't have a firearm available, they succeed less often.

To my, I repeat, uneducated eyes, the statistics I posted seem to show that people simply hang themselves when they don't have guns, but I cannot say with any kind of guarantee that this is correct. I don't like drawing such strong conclusions because I know it's not that simple to read statistics. If you can support your claims with data I'd love to read it.

Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by VikingCoder on Tuesday January 10, 2023 @03:36PM (#34331109)
Came across this:

https://www.hsph.harvard.edu/means-matter/means-matter/case-...

That to me shows that 82.5% of those who attempt suicide by firearms succeed, whereas the next causes are drowning 65%, hanging 61%, gas 41%, jumping 34%, then all the way down to drugs 1.5%, cutting 1.2%.

Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by allanmacgregor on Wednesday January 11, 2023 @07:18AM (#34337593)
Canadian goverment doesn't care about suicide in fact they encourage it :D or is it only okay when is goverment assisted ?
Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by Gwypaas on Tuesday January 10, 2023 @01:17PM (#34329068)
Fitting right in with Nicaragua and Zimbabwe.

https://en.wikipedia.org/wiki/List_of_countries_by_intention...

Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by throw0101c on Tuesday January 10, 2023 @03:26PM (#34330978)
> Mental health, crime, and drugs (also, again crime related to those), and you've solved most of the problems.

¿Por qué no los dos?

At the very least having a filter so that not just any rando can walk around packing heat would probably be helpful:

* https://www.autoblog.com/2022/01/31/florida-man-road-rage-sh...

If you want it at home for whatever reason, have fun. Though some safe storage laws may be a good idea (and strong liability):

* https://www.cbsnews.com/news/first-grader-allegedly-shot-tea...

Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by allanmacgregor on Wednesday January 11, 2023 @07:17AM (#34337586)
Canada has already the filters for legal gun owners; we are not the states the amount of hoops that legal gun owners have to go through.

Anyone that owns a restricted firearm; like handguns or rifles under certain length is added to a database and their name is daily checked for felonies, domestic abuse, etc.

In order to get a permit, you have to get sign of your spouse or if you are under 2 years divorced from the previous partner.

Mandatory training and course certification is part of it. We don't have open carry here.

Restricted can only be used on ranges. We have transport permits; etc etc etc

80% or more or guns used in violent crime are illegal and coming from the US border. Why? Harder to trace, don't any of the magazine or automatic restrictions that there are in Canada.

Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by incomingpain on Wednesday January 11, 2023 @09:05AM (#34338566)
>Even if you solved that, you'd still have problems with knives (you can't outlaw kitchen knives),

There are many pictures with labels in the uk saying you have to be over 18 to buy plastic utensils, because there's a knife.

This is why the UK had more homicides after banning firearms.

Homicides up, gun related homicides down. Turns out, you have some gangster shoot up a place. They land perhaps a couple shots and run off. The victim is rushed to hospital where they are saved.

Chef knife victim on the otherhand will die.

So the politicians who banned guns in the UK are morally responsible for more deaths occurring. They could have addressed the actual reason the homicides were occurring but failed to do so.