News for hackers. Stuff that matters.
Re:US companies are producing heat pumps that work below -20... by Cerium on Wednesday December 28, 2022 @10:36AM (#34162013)
In this case there is a higher delta between the system and the atmosphere as well as a higher delta between the hot and the cold side, which is what requires a stronger compressor.
Re:US companies are producing heat pumps that work below -20... by Gibbon1 on Wednesday December 28, 2022 @02:29PM (#34164818)
I had a HVAC guy mention that seals are problematic always with non hermetic compressors. Everything larger than a fractional HP system has a shaft seal between the compressor and the motor. Small systems being a pain because there is less refrigerant and no way to monitor the amount.
Re:US companies are producing heat pumps that work below -20... by warmwaffles on Wednesday December 28, 2022 @03:58PM (#34165858)
There is a way to monitor it, but you'd need to put in T-Junctions and add a pressure sensor on the high and low pressure sides. You'd then need to rig up some system to read those pressures. But _you_ would be unfortunately the one that has to do it because I don't think there are any off the shelf solutions.