-12V for RS-232 is easily generated from +5V or similar sources; max232 chips have been available since the 80s
People can easily overload 12V motherboard fan headers, too.
> if they are trying to get a lot of CFM.
If so, they probably have a PSU larger than the entry-level 350W unit I specified. Higher wattage PSUs will provide more power on the -12V rail as well.
> I don’t see a compelling reason to use 24V
Neither does anyone else. Still, correcting a bit of misinformation in the article.
24V fans in general are poorly stocked. 24V 4-wire PWM fans are, these days, more or less special order items. There are thousands of 12V 4-wire PWM fans in stock at Mouser and Digi-Key. There are less than a dozen 24V 4W fans in stock, and most of those are sizes you probably don't want.
I'm a consulting EE these days. One of the jobs I get to do is clean up designs that aren't working. We always flag these fans when we see them... then nothing gets done because they're "available enough"... then when build time comes we can't source the fans because the "stock item" is completely out of stock and all possible substitutes are out of stock. But 12V versions are available.
So, yeah, stick to 12V fans whenever possible (or 5V for the little guys). Also genuinely never use AC fans, but that's a different story.
I'm guessing the same holds for 48V fans?
'Ground' is not necessarily 0V, it is just convenient to use it like that. If 'ground' is 0V then 12V - 0V = 12V, but if you make 'ground' -12V then that is 12V - (-12V) = 24V.
This is false. ATX provides both +12V and -12V: * https://pinoutguide.com/Power/atxpower_pinout.shtml
Hooking them together would provide 24VDC. On a 350W PSU, I see -12V rated to supply 0.3A, which would allow for 24V fans drawing up to 7.2W of power, if desirable.
I don't see any reason to prefer 24V fans, however. The current losses over such short ranges are minimal, and I would think the larger economies of scale of 12V devices will keep 12V fans less expensive.