Re:1.461 seconds from 0 to 100km/h: students break accelerat...
by quickthrowman on Wednesday October 12, 2022 @03:49PM
(#33182089)
I know for certain there are 13.8 kV motors, I don’t see any reason why higher voltages aren’t possible for motors.
Re:1.461 seconds from 0 to 100km/h: students break accelerat...
by bobthepanda on Wednesday October 12, 2022 @04:12PM
(#33182413)
Usually you need to transform power anyways on a train, because
* lights, plug sockets, etc. are all at normal household voltages
* often trains will run on multiple voltages, so a transformer needs to be involved anyways
* lower voltages let you have thinner insulation, so thinner wires let you save space for things that matter more like a bigger passenger cabin
Re:1.461 seconds from 0 to 100km/h: students break accelerat...
by tomek_ycomb on Wednesday October 12, 2022 @04:06PM
(#33182330)
There already is conversion. The motors are inductors and phase current can be much higher than battery current
Re:1.461 seconds from 0 to 100km/h: students break accelerat...
by kwhitefoot on Wednesday October 12, 2022 @04:13PM
(#33182422)
Quite a few of the newer EVs have 800 V batteries to make fast charging more practical with cables light enough to be handled by ordinary humans.
You can make an electric motor run on pretty much any combination of voltage and current. You just have to make the appropriate trade-offs in insulation, conductor cross section, etc.
ABB (my former employer) makes motors that run on 13.8 kV with a power of up to 29 MW. See https://new.abb.com/motors-generators/high-voltage-induction...
1. You need a _lot_ of insulation at 50kV 2. I'm no expert but I very much doubt you could run a motor at anything approaching that voltage. Current electric cars, for example, run c400V as the main motor supply. So there would need to be voltage conversion, which adds weight and bulk.