Second hand Brocade ICX switches are also plentiful and not too power hungry (but they can be loud).
They run absurdly hot, and they eat a lot of power.
If you don't have very good ventilation then you may find these modules running at well north of 80C. I ended up having to mount a 120MM PC fan and attach some mini-headsinks to them to keep them under 50C. Just sitting on a desk they were too hot to touch.
You may find that the power budget for your small 8-12 port SFP+ Switch isn't enough to run more than a few of these at once. I have an 8 Port Mikrotik SFP+ switch that can only run about 4 of them. The Quad-Port SFP+ NIC I bought from fs.com (Intel XL710-BM1) can only do two.
Expect to also run into issues if you use old, poor quality or mistreated cables. If you bend them too far (trying to get around a sharp corner) - they will work fine at 1Gbit, but just not work at all at 10Gb.
You may find it's a whole lot cheaper (and more reliable) to just get some optical cable and transceivers if you want to go more than a few meters.
For distances less than a few meters DAC cables are often reasonable value.
From personal experience, I'm now leaving the 10G-BaseT transceivers for runs where I can't run optical (like existing in-wall wiring).
2.5GbE ethernet is super accessible now from Netgear, Trendnet, TPLink etc and doesn't require new NICs on any newer desktops. All my shit that 2.5GbE is useful supports 2.5GbE.
[1] As good as it gets on Azure, I guess. Which is not much at all, even on Ultra SSDs so I keep a local cache for smaller scale stuff
https://www.arista.com/assets/data/pdf/Copper-Faster-Than-Fi...
A few months later, I was upgrading to a 24-port managed switch, and found one with four SPF+ ports (Aruba 1930) for little more than I could find a purely gigabit switch (~£180). I moved the 10Gbps NAS/server link to the main network, and added 10GbE to my main PC (with another ConnectX-3), and it's been a really nice system to use. A little overkill for most of my usage, but it's nice to have.
I'm not convinced it's worth the cost of moving most of my other devices to 10GbE, even though I have a >1Gbps (down) Internet connection, as switches with more SPF+ ports or any 10G-BaseT ports (which some of my devices would require IIRC) seem rather expensive. Like you, I'm also open to suggestions if there's a cheap(ish) option I've overlooked.
[1] Side note: I actually moved a USB drive from the server to the NAS as it had significantly faster (by about 30%) sustained read/write speeds that way. I'm presuming the NAS is caching the requests in memory, but both are on a UPS and it's only temporary working data anyway so I'm not too worried if the data doesn't actually hit the disc immediately.
One issue I have with Bell Fibe is the new HomeHub 4000 hardware is mandatory, and the GPON optic is not removable (the one in the HH 3000 is).
I'm not exactly enamoured at having to use Bell's hardware (though I'm sure it gets the job done for most people).
I also heard about buying special optics that you can completely set up to mimic the original bell GPON, down to the SN but those are expensive. It's so weird to "downgrade" such a useful feature (that does not even hurt any other part of their business, and only serve to make 1.5gbps+ speeds more attractive for those who would actually need that much speed), but hey it's still bell after all
The issue is that it seems to be very hard to find affordable switches with 10gbe ethernet copper ports, instead of SFP. The few that exist either cost more than what I pay for my connection in an entire year, or don't interact well with the ISP provided hub/modem (it has no SFP). Bell also seems to have locked down their new hardware so it is impossible to bypass their hub. And while I have a home server rack, even the more affordable second hand enterprise switches are usually ancient powerhogs.
So for now wifi 6e is basically just as fast as my wired setup, which is weird.
I guess I'm not used to being at the edge of home networking tech as a canadian... but I'd be happy to hear about recommendations and what to look for/avoid with that type of gear either (new or used)