The SDS EFI people claim up to a 20% fuel effiency gain by going to multipoint fuel injection on existing engines.
If you have consistent cooling (hey, guess what, those rear cylinders on an O-540 are running hotter than the fronts), you can run more timing and more compression.
More timing, more compression, less fuel = more efficiency. Basically everything I'm talking about is more cruise power efficiency!
I have GAMIs; they are one per cylinder, just like the factory injectors were, but provide closer matched air-fuel ratios. I also have per-cylinder EGT and CHT instruments and have measured less than 0.3gph spread (about 2%) between the leanest and richest cylinder. Modern cars are rarely measuring per-cylinder fuel, but rather measuring the average of half or all the cylinders and using that to adjust short and long term fuel trims.
Also, I dont know that you want to increase the compression on the hot cylinder. If anything Id run rich to make sure it doesnt knock