Re:Google cracks down on VPN based adblockers
by hedora on Monday August 29, 2022 @12:26PM
(#32640102)
If you already have an always-on computer (NAS, router, etc), installing it there is likely to increase your electric bill less than running a raspberry pi.
Re:Google cracks down on VPN based adblockers
by int_19h on Tuesday August 30, 2022 @04:55PM
(#32654932)
You don't need to use the more power-hungry RasPis, either - PiHole works great on Zero W.
Re:Google cracks down on VPN based adblockers
by criddell on Monday August 29, 2022 @08:22AM
(#32637292)
Are you sure about the 3.5W? That seems high. An iPad at idle with the display on uses less than that.
Re:Google cracks down on VPN based adblockers
by LaputanMachine on Monday August 29, 2022 @09:06AM
(#32637703)
About 3W is realistic for a Pi 4. Here's a comparison:
Re:Google cracks down on VPN based adblockers
by t0bia_s on Monday August 29, 2022 @08:59AM
(#32637624)
I use RPi 3B because of lower power consumption than 3B+, 4B... It is around 300mA. I connect power cable to USB from router that has 500mA output. It works great.
RPi 3B+ has sometimes problem with stability because of higher power consumption.
Official power supply of RPi is 2,6A if I remember correctly, so 3,5 is not even possible?
Btw, many routers support sleep mode. It is not necessary to run router/connected RPi 24/7.
Re:Google cracks down on VPN based adblockers
by Kirby64 on Monday August 29, 2022 @09:47AM
(#32638182)
Watts vs. current.
At 300mA, that's 1.5W of power.
Maximum current draw on a pi4 is 3A (~15W), but that's purely a power supply input limitation. You only get close to that with a ton of peripherals and heavy load on the Pi.
There are alternatives, but most other solutions will end up costing more in electricity costs. Especially problematic in say Europe right now.