News for hackers. Stuff that matters.
Re:Google cracks down on VPN based adblockers by hashworks on Monday August 29, 2022 @07:25AM (#32636846)
It's just software, you can install it on any server. No need to limit yourself to (currently?) overpriced Pis.
Re:Google cracks down on VPN based adblockers by kd913 on Monday August 29, 2022 @07:54AM (#32637104)
Sure, but a pi consumes about 3.5W of energy and can run 24/7/365.

There are alternatives, but most other solutions will end up costing more in electricity costs. Especially problematic in say Europe right now.

Re:Google cracks down on VPN based adblockers by hedora on Monday August 29, 2022 @12:26PM (#32640102)
If you already have an always-on computer (NAS, router, etc), installing it there is likely to increase your electric bill less than running a raspberry pi.
Re:Google cracks down on VPN based adblockers by int_19h on Tuesday August 30, 2022 @04:55PM (#32654932)
You don't need to use the more power-hungry RasPis, either - PiHole works great on Zero W.
Re:Google cracks down on VPN based adblockers by criddell on Monday August 29, 2022 @08:22AM (#32637292)
Are you sure about the 3.5W? That seems high. An iPad at idle with the display on uses less than that.
Re:Google cracks down on VPN based adblockers by LaputanMachine on Monday August 29, 2022 @09:06AM (#32637703)
About 3W is realistic for a Pi 4. Here's a comparison:

https://www.pidramble.com/wiki/benchmarks/power-consumption

Re:Google cracks down on VPN based adblockers by t0bia_s on Monday August 29, 2022 @08:59AM (#32637624)
I use RPi 3B because of lower power consumption than 3B+, 4B... It is around 300mA. I connect power cable to USB from router that has 500mA output. It works great.

RPi 3B+ has sometimes problem with stability because of higher power consumption.

Official power supply of RPi is 2,6A if I remember correctly, so 3,5 is not even possible?

Btw, many routers support sleep mode. It is not necessary to run router/connected RPi 24/7.

Re:Google cracks down on VPN based adblockers by Kirby64 on Monday August 29, 2022 @09:47AM (#32638182)
Watts vs. current.

At 300mA, that's 1.5W of power.

Maximum current draw on a pi4 is 3A (~15W), but that's purely a power supply input limitation. You only get close to that with a ton of peripherals and heavy load on the Pi.

Re:Google cracks down on VPN based adblockers by t0bia_s on Monday August 29, 2022 @05:02PM (#32643514)
Ah, yes, sorry, my mistake.