News for hackers. Stuff that matters.
Re:Flipper Zero – Portable Multi-Tool Device for Geeks by peddling-brink on Wednesday July 20, 2022 @02:49PM (#32170415)
Out of the box it supports limited raw rf capture and replay. Your garage door (probably) and your car key fob use rolling codes which change each time the button is pressed. This is not supported, and likely won’t be in the official firmware. I’ve used mine to make copies of all rf and ir remotes in my home. Fans, tv, bidet, AC, etc.
Re:Flipper Zero – Portable Multi-Tool Device for Geeks by Aspos on Wednesday July 20, 2022 @03:13PM (#32170746)
TIL some bidets can be controlled remotely. I feel like an ape.
Re:Flipper Zero – Portable Multi-Tool Device for Geeks by packetslave on Wednesday July 20, 2022 @03:48PM (#32171198)
Story time! Google is (was) famous for having Toto Washlet bidet seats in its restrooms, which have wireless control panels attached to the stalls.

New building opens up, vendor screws up and the control panel in stall #1 is programmed to control the Washlet in stall #2. Cue the predictable (and hilarious) email thread on #<building>-misc, along with a whole lot of memes.

Re:Flipper Zero – Portable Multi-Tool Device for Geeks by msoucy on Wednesday July 20, 2022 @03:35PM (#32171031)
I'm more concerned about why you would need a remote for something that depends on you being there...
Re:Flipper Zero – Portable Multi-Tool Device for Geeks by jpollock on Wednesday July 20, 2022 @03:46PM (#32171170)
It allows a control to be wall mounted without having to run a wire from there to the bidet...
Re:Flipper Zero – Portable Multi-Tool Device for Geeks by poglet on Wednesday July 20, 2022 @06:43PM (#32173390)
There was a toilet in Japan I couldn't for the life of me work out how to flush, I spent ages in this bathroom checking for buttons here and there. Only after I had given up and walked away from the toiled did it flush.
Re:Flipper Zero – Portable Multi-Tool Device for Geeks by SamBam on Wednesday July 20, 2022 @09:23PM (#32174666)
That's been a constant refrain about IR auto-flushing toilets for about 30 years. They were invented in 1988.
Re:Flipper Zero – Portable Multi-Tool Device for Geeks by dandelany on Wednesday July 20, 2022 @08:14PM (#32174185)
From a security point of view, it sure makes for an interesting attack surface
Re:Flipper Zero – Portable Multi-Tool Device for Geeks by sorenjan on Thursday July 21, 2022 @06:06AM (#32177509)
You have to look out for backdooring though.
Re:Flipper Zero – Portable Multi-Tool Device for Geeks by hazmazlaz on Thursday July 21, 2022 @08:27AM (#32178497)
That's one penetration test that I would not want to participate in.
Re:Flipper Zero – Portable Multi-Tool Device for Geeks by orthoxerox on Wednesday July 20, 2022 @04:30PM (#32171852)
Not necessarily you being there.
Re:Flipper Zero – Portable Multi-Tool Device for Geeks by DonHopkins on Wednesday July 20, 2022 @04:57PM (#32172224)
Pootooth.
Re:Flipper Zero – Portable Multi-Tool Device for Geeks by goatcode on Wednesday July 20, 2022 @03:32PM (#32170977)
If it's ape-like to not be able to detach from your own ass and walk around, I guess I'm in that group too.
Re:Flipper Zero – Portable Multi-Tool Device for Geeks by kweks on Thursday July 21, 2022 @04:03AM (#32176884)
Slight correction: There are two modes of RF Capture available : "Read RAW" and "Read".

"Read RAW" does exactly what it says on the label: Captures a raw stream, based on the specified frequency and demodulation.

"Read" captures, decodes and attempts to interpret the signal capture. The FlipperZero has a large built in database of brands + models of RF devices, and a database of KeeLoq master keys.

For rolling remotes that are KeeLoq based, with known keys, the Flipper can most definitely decode / decrypt rolling codes, and generate the next in the sequence.

TL;DR: Handles fixed + Rolling codes, via built in database of keys + models.

Re:Flipper Zero – Portable Multi-Tool Device for Geeks by mystickphoenix on Wednesday July 20, 2022 @06:10PM (#32173091)
FWIW I've used mine to duplicate both of our car key fobs (middle 2000's Mazda and middle-2010's Jeep) so it'll probably be very dependent on make/model/age as to whether it uses rolling codes.
Re:Flipper Zero – Portable Multi-Tool Device for Geeks by worthless-trash on Thursday July 21, 2022 @12:38AM (#32175837)
Surely these rolling code devices should be started by some kind of seed, otherwise how does one replace a remote ?

I'm not convinced that there is a 'non destructive' method to find that out though.

Re:Flipper Zero – Portable Multi-Tool Device for Geeks by jsjohnst on Thursday July 21, 2022 @08:36AM (#32178566)
> otherwise how does one replace a remote

There’s a pairing mode you put the car in and it accepts the new keyfob and probably records it’s seed / counter / etc at that point.