Also, I highly doubt some of these can run on crude oil. Before this claim the only type of device capable of such fuel ranges I knew of is the main battle tank. It makes more sense to me that a tank is designed for versatility, and a gas turbine for efficiency on a single precise fuel. What's exactly the catch here?
I'd like a source on these claims
> Its multiple-fuel combustion system allows switching from one fuel to another while running under load.
Note that gas turbines are very flexible with fuels because it's a continuous combustion process and done at very high temperatures. That means you don't care about flamefronts, knocking, octane figures, etc. All that matters is that whatever you burn ends up hotter that when it started, which is kinda the definition of a fuel. Also, no expensive high precision parts of the engine touch the flame - all combustion is over by the time you get to the turbine blades (which are film cooled anyway, so even the combustion gases don't touch the blades)
> Oils: Includes crudes and other refined residuals that are heated to acceptable levels to enable the needed viscosity for gas turbine combustion.
https://www.ge.com/content/dam/gepower-new/global/en_US/down...
I would guess the main limiting factor will be that these machines cost tens of millions of dollars, and even with a small probability of the wood gas damaging the machine, the owner will say no to any experimentation.
Having said that, the manufacturers do tend to like to add extra things to the spec sheets of their turbines, so might well support trials of such things.
It's obviously gonna be needing extra infrastructure for heated feed pipes (to keep the wood gas from condensing) and high temperature valves, filters, and flow meters. You might be needing gas composition sensors and a feedback system to deal with the fact wood gas can be pretty variable in its composition.
I would imagine you might also tap off some of the post-combustion hot gasses from before (or even after) the turbine to act as thermal input to your gasifier too. That wouldn't be strictly necessary, but should improve efficiency.
Nearly all gas turbine power stations can also run on oil. Oil is usually a backup method in case the gas supply is disrupted, but it is possible for them to run on oil continuously. The exact oil type required differs, but some can use Diesel/Petrol/Kerosene/ethanol/hydrogen or sometimes even unrefined crude oil.
With gas prices so high, many are already running on oil, and that's part of the reason Diesel/Petrol prices are so high, even though the price of crude oil hasn't gone up much for months.
On charts of power generation, they still show up in the 'gas' category, even if they're burning oil. As far as I know, apart from the tanker of fuel arriving every 10 minutes day and night there is no way to know what they're burning.