Re:Large-scale ‘sand battery’ goes online in Finland
by datadata on Wednesday July 06, 2022 @07:12PM
(#32008044)
Newton's law of cooling just says that your loss is going to be proportional to the temperature difference. But 1) the capacity of the battery is also proportional to the temperature difference, so the loss as a percentage of total energy stored should be roughly a constant. 2) If the application is home heating, you can't heat the home to a higher temperature than the battery itself, and you also can't easily group together the energy into a higher temperature. You would on the other hand want a high temperature for the heat to transfer quickly from the convection medium to the actual houses. So starting hot would make a lot of sense despite the downsides?
Re:Large-scale ‘sand battery’ goes online in Finland
by 8bitsrule on Wednesday July 06, 2022 @07:04PM
(#32008000)
Sand (much denser = sinks in water) has low thermal conductivity, and isn't much more expensive.
Simply put, in two bodies of equal volume and 'heat capacity', the one that's hotter stores more heat.
Sand properties: [https://material-properties.org/sand-density-heat-capacity-t...]
Re:Large-scale ‘sand battery’ goes online in Finland
by tommiegannert on Thursday July 07, 2022 @03:11AM
(#32010820)
From your link, sand has much worse heat capacity than water at 800 J/kgK vs 4000 for water.
Given Newton's law of cooling, it's not entirely clear to me why you want your thermal battery to be heated to above 100C... But I'm not an engineer - I only play one on TV.