No gas stove I’ve used has had this functionality. They let you set the exact output you want, which is not the same (and induction cooktops can do that too).
Yes, if you want to set a specific temperature induction cooktops will cycle, but you can also use them the same way you’d use a gas stove and then they don’t.
My experience with induction cooktops is admittedly mostly with portable ones, because I’m renting for now and can’t install my own stove. I suspect mine’s just not sophisticated enough. :)
Gas stoves would likely cycle as well if they had a temperature set feature. It's what gas ovens do.
> cycling is just usually a good way to maintain a temperature when you've got a pan and some food sitting on top of it since there's quite a bit of inertia in actually changing the temperature of whatever is on the stove.
Why precisely is cycling more effective than attenuating down (better word please?) the output? I don’t see what the thermal inertia of what’s on the cooktop has to do with making the optimal (for cooking) choice between cycling and modulating the power.
Without detailed knowledge of the precise energy and time costs, I think it’s a fair default assumption that continuous power modulation should be more efficient, because it’s in a sense a superset of cycling, with much more fine grained control, but you can always set the continuous power output to 0 or 1 to accomplish cycling if in a specific scenario it is helpful.
Maybe when you say “a good way” you mean “a good enough way”? That makes sense, but doesn’t really sell induction stoves relative to gas (if you want to sell induction stoves relative to gas, I suggest to downplay any cycling and promote the continuous output modulation)..
Increasing temperature is a function of the range, and in my experience induction is significantly faster.
To the extent that "it must vary on and off to maintain temperature" is true, that's not really relevant. As a sibling poster states, you're not setting a temperatures. You're setting a level of output on both induction and gas. Your food is separated from the output by a heat reservoir and cannot possibly respond quickly enough to induction's on/off switching for this to matter. This does however, seem to be an area where induction can vary greatly in quality, and I suspect most of the complaints people have about induction have more to do with dodgier induction units than they do with the technology versus gas.
the one way in which they surpass induction stoves is the only thing that counts, instant control of the heat applied to the pan.