News for hackers. Stuff that matters.
Re:TX-6 – Teenage Engineering by ruined on Thursday April 21, 2022 @11:30AM (#31110754)
if i wanted a simple mixer and usb audio interface with fx send and i didn't want to spend a thousand dollars on it, what's the range of alternatives

i've spent under $150 on every individual item in my kit so far and it feels silly to blow past that on a mixer.

Re:TX-6 – Teenage Engineering by P_I_Staker on Thursday April 21, 2022 @11:47AM (#31111015)
Mackie, Zoom, and Allen & Heath have mixers for 300ish buck, with 10ish inputs and are fairly featurefull.

I wouldn't count on the interface doing everything you dream of, even if it seems like it can based on specs. I owned the allen & heath, but traded it for the mackie one. It's okay, but there's a few annoyances.

Keep in mind that the FX send will also require a return (may sound obvious, but it's not to everyone), therefore, it will consume an input; they basically never have a dedicated return (it's pretty much pointless).

The FX send itself might not be really necessary, but I don't know enough to say for sure. I think they could just label it AUX, and that any auxiliary, or monitor send can work for FX... I'm not sure. I've used them before and the FX to monitor / sample.

Re:TX-6 – Teenage Engineering by l33tbro on Thursday April 21, 2022 @05:11PM (#31115240)
There are far better and cheaper optionsavailable.

I recently bought a Mackie 1604 for a hundred bucks. It's from 1993 and they were basically designed to fall off buildings. Super transparent and likely to outlast this thing due to being much more operable. Not as pretty or quirky, but that doesn't really factor in to my use case.

For stereo compression, you can get a brand new Really Nice Compressor for a couple of hundred bucks. Steve Albini has these in his studio, so that alone should indicate their high quality.

Re:TX-6 – Teenage Engineering by MrBuddyCasino on Thursday April 21, 2022 @11:58AM (#31111191)
FX send narrows it down, I think the Mackie ProFX6v3 and the Behringer Flow 8 should do the trick if you want small & cheap. Otherwise the Yamaha AG03/AG06 are decent too.
Re:TX-6 – Teenage Engineering by ruined on Thursday April 21, 2022 @12:08PM (#31111322)
thanks
Re:TX-6 – Teenage Engineering by kamranjon on Thursday April 21, 2022 @11:48AM (#31111029)
Not sure this tics all your boxes but in a similar form factor the zoom H6 seems to be something people really like (the h4n was kinda huge when it first came out) - https://zoomcorp.com/en/us/handheld-recorders/handheld-recor...
Re:TX-6 – Teenage Engineering by ruined on Thursday April 21, 2022 @11:55AM (#31111140)
i've got an h4n, i played with it yesterday, but i am looking for something with faders and an auxiliary effects loop to mix synths for dawless jamming
Re:TX-6 – Teenage Engineering by ruined on Monday May 02, 2022 @12:51PM (#31237600)
in the end, i bought a broken old Boss mixer under $100, to refurb.
Re:TX-6 – Teenage Engineering by scarecrowbob on Thursday April 21, 2022 @04:56PM (#31115072)
Behringer xr12 might be a good choice. I have been using the xr18 (x32, etc) for years and they are good values.

A Focusrite Scarlet 8i6 would serve as a mixer if you don't mind being tied to a computer.

But if you just needed a mixer, the Yamaha MG series stuff is fine and in line with your price point.

Re:TX-6 – Teenage Engineering by abxytg on Thursday April 21, 2022 @11:40AM (#31110898)
you're paying 4 figures or you're getting a plastic piece of crap from $50 on amazon, and it just has line out not usb audio.
Re:TX-6 – Teenage Engineering by vvvzxd on Thursday April 21, 2022 @02:48PM (#31113649)
yamaha mixers are good