Java doesn't allow those things, and thus it must instead give you lots of levers to pull on to tune the GC.
It is just a different strategy of achieving the same thing:
https://itnext.io/go-does-not-need-a-java-style-gc-ac99b8d26...
Counter-example: The Go GC is tuned for HTTP servers at latency sensitive companies like Google. It therefore prioritizes latency over throughput to an astonishing degree, which means it is extremely bad at batch jobs - like compilers.
What language is the Go compiler written in? Go.
This isn't fixable by simply writing the code differently. What you're talking about is in the limit equivalent to not using a GCd language at all, and you can do that with Java too via the Unsafe allocators. But it's not a great idea to do that too much, because then you may as well just bite the bullet and write C++.
Java doesn't actually need lots of GC tuning parameters. Actually most of the time you can ignore them, because the defaults balance latency and throughput for something reasonable for the vast majority of companies that aren't selling ad clicks. But, if you want, you can tell the JVM more about your app to get better results like whether it's latency or throughput sensitive. The parameters are there mostly to help people with unusual or obscure workloads where Go simply gives up and says "if you have this problem, Go is not for you".
I do not see what are you trying to say?
The Go compiler is plenty fast in my experience, especially compared to say `javac`. The startup time of `javac` (and most java programs) is atrocious.
The algorithmic tradeoffs here are really well known and there are throughput comparisons of similar programs written in similar styles that show Go falling well behind. As it should, given the choices made in its implementation, in particular the "only one GC knob" choice.
I'd guess you'd have no choice if in order to hire developers, you had to choose a language that the people found fun to use.
Nope, Go does not use a copying or generational GC. Go uses a concurrent mark and sweep GC.
Even then, generational GCs are not as cheap as stack allocation.
I can see the difference being that you have to scan a generation but the entire stack can be freed at once, but it still seems like an overly specific term. The general term elsewhere for multiple allocations you can free at the same time is "arenas".
The entire set of local variables can be allocated with a single bump of the stack pointer upon entry into a function, and they can all be freed with another bump of the stack pointer upon exit. With heap allocations, even with the simplest bump allocator.. you still have to allocate once per object, which can easily be an order of magnitude more work than what you have to do with an equivalent number of stack allocated objects. Your program doesn't magically know where those objects are, so it still also has to pay to stack allocate the pointers to keep track of the heap objects. Then you have the additional pointer-chasing slowing things down and the decreased effectiveness of the local CPU caches due to the additional level of indirection. A contiguous stack frame is a lot more likely to stay entirely within the CPU cache than a bunch of values scattered around the heap.
Beyond that, and beyond the additional scanning you already mentioned, in the real world the heap is shared between all threads, which means there will be some amount of contention whenever you have to interact with the heap, although this is amortized some with TLABs (thread-local allocation buffers). You also have to consider the pointer rewriting that a generational GC will have to perform for the survivors of each generation, and that will not be tied strictly to function frames. The GC will run whenever it feels like it, so you may pay the cost of pointer rewriting for objects that are only used until the end of this function, just due to the coincidence of when the GC started working. I think (but could be wrong/outdated) that generational GCs almost all require both read and write barriers that perform some synchronization any time you interact with a heap allocated value, and this slows the program down even more compared to stack objects. (I believe that non-copying GCs don't need as many barriers, and that the barriers are only active during certain GC phases, which is beneficial to Go programs, but again, stack objects don't need any barriers at all, ever.)
GCs are really cool, but stack allocated values are always better when they can be used. There's a reason that C# makes developer-defined value types available; they learned from the easily visible problems that Java has wrestled with caused by not allowing developers to define their own value types. Go took it a step further and got rid of developer-defined reference types altogether, so everything is a value type (arguably with the exception of the syntax sugar for the built-in map, slice, channel, and function pointer types), and even values allocated behind a pointer will still be stack allocated if escape analysis proves it won't cause problems.
Why can’t you bump once to allocate enough space for multiple objects?
If you allocate them all as a single allocation, then the entire allocation would be required to live as long as the longest lived object. This would be horribly inefficient because you couldn’t collect garbage effectively at all. Memory usage would grow by a lot, as all local variables are continuously leaked for arbitrarily long periods of time whenever you return a single one, or store a single one in an array, or anything that could extend the life of any local variable beyond the current function.
If you return a stack variable, it gets copied into the stack frame of the caller, which is what allows the stack frame to be deallocated as a whole. That’s not how heap allocations work, and adding a ton of complexity to heap allocations to avoid using the stack just seems like an idea fraught with problems.
If you know at compile time that they all should be deallocated at the end of the function… the compiler should just use the stack. That’s what it is for. (The one exception is objects that are too large to comfortably fit on the stack without causing a stack overflow.)
No, you can copy objects out if they live longer than others. That's how a generational GC works.
Generational GCs surely do not do a single bump allocate for all local variables. How could the GC possibly know where each object starts and ends if it did it as a single allocation? Instead, it treats them all as individual allocations within an allocation buffer, which means bumping for each one separately. Yes, they will then get copied out if they survive long enough, but that’s not the same thing as avoiding the 10+ instructions per allocation.
It’s entirely possible I’m wrong when it comes to Truffle, but at a minimum it seems like you would need arenas for each size class, and then you’d have to bump each arena by the number of local variables of that size class. The stack can do better than that.
object_a = tlab
tlab += 8
check tlab limit
object_b = tlab
tlab += 8
check tlab limit
When you allocate as a single allocation it looks like this: object_a = tlab
object_b = tlab + 8
tlab += 16
check tlab limit
What about that do you see as impossible?> How could the GC possibly know where each object starts and ends if it did it as a single allocation?
As above.
If you have three local objects that are 8 bytes, 16 bytes, and 32 bytes… if you do a single 48 byte allocation on the TLAB, how can the GC possibly know that there are three distinct objects, when it comes time to collect the garbage? I can think of a few ways to kind of make it work in a single buffer, but they would all require more than the 48 bytes that the objects themselves need. Separate TLAB arenas per size class seem like the best approach, but it would still require three allocations because each object is a different size.
I understand you’re some researcher related to Truffle… this is just the first I’m hearing of multiple object allocation being done in a single block with GC expected to do something useful.
Because the objects are self-describing - they have a class which tells you their size.
object_a = tlab
object_a.class = ClassA
object_b = tlab + 8
object_b.class = ClassB
object_c = tlab + 16
object_c.class = ClassC
tlab += 48
check tlab limitYou’re extremely knowledgeable on all this, so I’m sure that nothing I’m saying is surprising to you. I don’t understand why you seem to be arguing that heap allocating everything is a good thing. It is certainly more expensive than stack allocation, even if it is impressively optimized. Heap allocating as little as necessary is still beneficial.
You may be confusing with scalar replacement of aggregates, which is a separate concept.
The only time Go has anything like a class pointer for any object on the stack is in the case of something cast to an interface, because interface objects carry metadata around with them.
These days, Go doesn’t even stack allocate all non-escaping local variables… sometimes they will exist only within registers! Even better than the stack.
Did you read the article I linked? That's what it says - and this isn't stack allocation, it's SRA. Even 'registers' is overly constrained - they're dataflow edges.
Here is a contrived example that creates a 424 byte struct: https://godbolt.org/z/5cKh7xTzq
As can be seen in the disassembly, the object created in "Process" does not leave the stack until it is copied to the heap in "ProcessOuter" because ProcessOuter is sending the value to a global variable. The on-stack representation is the full representation of that object, as you can also see by the disassembly in ProcessOuter simply copying that directly to the heap. (The way the escape analysis plays into it, the copying to the heap happens on the first line of ProcessOuter, which can be confusing, but it is only being done there because the value is known to escape to the heap later in the function on the second line. It would happily remain on the stack indefinitely if not for that.)
It's cool that Graal does SRA, but Go will actually let you do a lot of work entirely on the stack (SRA'd into registers when possible), even crossing function boundaries. In your SRA blog post example, when the Vector is returned from the function, it has to be heap allocated into a "real" object at that point. Go doesn't have to do that heap allocation, and won’t have to collect that garbage later.
Most of the time, objects are much smaller than this contrived example, so they will often SRA into registers and avoid the stack entirely… and this applies across function boundaries too, from what I’ve seen, but I haven’t put as much effort into verifying this.
Sorry I haven’t had time to read your article. It’s on my todo list for later.
But TLABs are heterogenous by size. Objects of all sizes go in one linear allocation space. So allocating two objects next to each other is the same as allocating them both at the same time.
The stack has the requirement that its size must be known at compile time for each function. In oversimplified terms its size is going to be the sum of size_of of all the syntactically local variables.
So for example you cannot grow the stack with a long loop, because the same variable is reused over and over in all the iterations.
You can instead grow the heap as much as you want with a simple `while(true){malloc(...)}`.
Huh?
def foo:
return [new Object, new Object]
That'll always bump the TLAB three times. Why not bump it one time for all objects?> The stack has the requirement that its size must be known at compile time for each function.
Also huh?
For example a local array that has a dynamic size.
Not really. You can bump your stack pointer at any time. Even C has alloca and VLAs. In lots of languages it's dangerous and not done because you can stack overflow with horrible results, and some (but not all) performance is lost because you need to offset some loads relative to another variable value, but you can do it.
What the stack really has a requirement that any values on it will go full nasal demon after the function returns, so you'd better be absolutely certain the value can't escape - and detecting that is hard.
This is a drawback in some cases, since one size never truly fits all, but it dramatically simplifies things for most applications, and the Go GC has been tuned for many years to work well in most places where Go is commonly used. The developers of Go continue to fix shortcomings that are identified.
Go’s GC prioritizes very short STWs and predictable latency, instead of total GC throughput, and Go makes GC throughput more manageable by stack allocating as much as it can to reduce GC pressure.
Generally speaking, Go is also known for using very little memory compared to Java.