https://www.crowdsupply.com/great-scott-gadgets/luna
It looks cool but I haven't got one to mess with yet
Especially with USB-PD 3.1 which has an adjustable voltage supply mode [1] so you are not constrained to only a handful of power profiles. I think in theory you could offer 5V, 9V, and 15-48V.
It would be cool because it would be much easier to carry (keep in your backpack) and I imagine cheaper than a benchtop power supply so long as you have access to a capable USB-C charger. But I'm not sure what you'd be missing out on versus a proper benchtop.
This is the one I got a while ago it and it works great: https://www.tindie.com/products/clarahobbs/pd-buddy-sink/ though there's several other options out there
A small board/box with a DC to DC regulator, knob, and display, could still be quite a bit smaller than a big bench supply, and provide reasonable performance. USB-C in (at a fixed power profile) to an output from a variable buck supply, for example.
https://eclecti.cc/hardware/tiny-usb-type-c-adjustable-power...
Update: it seems that Linux gives some stats about it: https://askubuntu.com/questions/1351186/how-to-debug-usb-c-p...
The price is fine, and even just this one would save me loads of debugging efforts at home.
https://www.jeffgeerling.com/blog/2017/review-satechi-usb-ty...
- Upgrading a 2009 Apple wireless keyboard to li-ion plus usb-c charging. A 14500 li-ion cell is 3.7C, and exactly the same size as a AA cell. You can get charging/protection circuits[1] and voltage regulators[2] for nothing online.
- Upgrading mice, headphones, etc from micro-usb to usb-c. Usually I solder in a usb-c connector upside down in place of micro-usb, add the correct resistors (there are CC or charge configuration pins). If you don't need data, you want these connectors with only the required pins and not more[3] or breakout connectors if you have space[4]. If anyone knows a breakout connector that has CC resistors installed I'd love to buy it. Or for gluing in place instead of soldering, this connector[5] is the only one I have found of any type with the correct CC resistors already installed.
- Using usb-c for powering small prototype things instead of using a benchtop power supply. You can get power modules configured to one voltage[6], or adjustable ones[7]
- Fixing janky usb-c powered electronics that only work with a usb a-c cable. Usually they are missing charge configuration resistors to get 5V. For 5V up to 3.0A, you can use simply using these resistors instead of usb PD. Usually you have to replace the connector with one that exposes the CC pins.
For all of above, this device[8] is invaluable for troubleshooting although this one looks like it has more capabilities similar to the usb-c explorer[9]. And might as well get a usb-c soldering iron too[10]. And this GaN power brick which is tiny[11]. It's enough for an intel macbook under light loads.
[1] https://www.aliexpress.com/item/1005002953903622.html
[2] https://www.aliexpress.com/item/32813195533.html
[3] https://www.aliexpress.com/item/32966491026.html
[4] https://www.aliexpress.com/item/1005001335550637.html
[5] https://www.aliexpress.com/item/1005002449606066.html
[6] https://www.aliexpress.com/item/1005001668143510.html
[7] https://www.aliexpress.com/item/1005002196188312.html
[8] https://www.jeffgeerling.com/blog/2017/review-satechi-usb-ty...
[9] https://www.aliexpress.com/item/32968303350.html
[10] https://pine64.com/product/pinecil-smart-mini-portable-solde...
Basically, you attach the board to any USB port and it will show capabilities (voltage and amperage) on a tiny OLED display. And since the firmware is open-source, it's possible to play around and test a lot of what-ifs: https://github.com/ReclaimerLabs/USB-C-Explorer
I am not engaged with the project other than a very happy user.
In other news, the latest USB PD spec allows to pass up to 48V@5A=240W power.