Thank you for answering.

I lived in a area where there were a lot of small and fairly poor farmers. I also had a machine shop. You can see where this is going: come harvest time tons of stuff that had been sitting for a year suddenly had to work 16 hours per day and predictably quite a bit of it would break in the field, usually simple stuff, bearings, shafts, welds. So once word got around that I was an ok welder with a machine shop every year a couple of farmers would find their way to my door with broken balers, older harvesters and s on. Fixing those would keep us in produce and meat for months. But I never ran into a Mahindra, though they were in use.

Tightening emissions rules are having an effect on this, at least here in the US. My small late-model Kubota has a diesel particulate filter and a fair bit of electronics to manage it. I've been told that if you don't follow the emissions instructions, the system will shut down and a Kubota official will have to come out to "unlock" your tractor.

Having owned both CUT without any emissions control(1981) and a Kubota w/ DPF, I'll take the DPF every day. It's quieter, cleaner and the emissions controls are even more straightforward than other modern diesels. If you have a full DPF, you just regen it for 10-15(usually while you're working) and you're good to go.