Re:I built my own Sega Genesis (Mega Drive) hardware dev kit...
by djmips on Friday January 21, 2022 @10:25PM
(#30033085)
It's probably better than what the original poster has made, however you can debug with gdb directly on the hardware with the simple design of bidirectional communication / dual port RAM and a little bit of ROM code to boot your debug code into the Genesis / MD memory. That's what we did. Single stepping is supported by using 68K trap instructions. The command set isn't very big. Mostly read memory / write memory / Run. I can't remember how we implemented stop but IIRC it was polling from an interrupt routine that was running from a timer. In any case you can get a lot of mileage out of a simple bit of hardware.
[ Parent
| on HN ]
Re:I built my own Sega Genesis (Mega Drive) hardware dev kit...
by jdmoreira on Saturday January 22, 2022 @05:06AM
(#30035315)
Thank you for your reply.
Yes, I'm aware you can basically link a gdb stub within your own program as well.
I want to encourage you to release your code if you still have it somewhere!