"I have no picture" will definitely be fixed with a better cable.
"My colors look wrong" will not, and cannot, be-- for the reasons discussed in the article.
Believe me, I would agree with you had I not been troubleshooting the issue for the last 4 years, but it did fix it.
It is entirely possible the guy ended up changing more than just the cable and didn't mention it.
This experience reminds me a lot of the Google Ops Team talk at Google I/O this year where they gave stats on things that caused outages and kept punctuating the point that things you think are impossible, will happen at-scale.
"HDMI is a digital signal, it either works or doesn't, degraded analog signal artifacts are impossible!"
Apparently not =/
Whoever makes this "digital streams cannot degrade" argument has obviously never tried to watch DVB-T behind a hill.
I believe DVB-T uses MPEG-2 or some variation. While HDMI video doesn't use a motion vector based encoding. So when you have errors with MPEG-2, it could be on B or P frame which results in the delta from the previous I frame being drawn incorrectly (or not at all). With HDMI, the error won't show up in a delta frame (because there aren't any), rather just white pixels.
Could it be related to how the cable affects the transmitting or receiving circuitry? (Electrical impedance mismatch or crosstalk comes to mind.)
I wish HDMI equipment would display a counter of digital errors. For all non-defective cables, this counter should be 0 all the time.
Or is it? Maybe in some special diagnostic mode?
Does the HDMI signal provide a checksum of any kind? I was under the impression that it's just a raw TMDS bitstream of color values with no redundancy.
* control packets (non-video, non-audio) are protected using TMDS Error Reduction Coding (TERC4)
* audio packets seem error-protected at a higher level (by Dolby or DTS?)
* video packets are *not* error-protected
Wow. I am shocked. How can anyone design a high-speed video digital transport layer these days without error correction? Source: http://arstechnica.com/civis/viewtopic.php?p=6271817#p627181...If your internet connection is working, HN looks the same with a good connection or a bad connection. If your internet connection is down, you get nothing. 0.01% of the time, you might get a garbled page from a bad connection, but it's not a common problem.
But people think that the cables are like radio antennas, and a better cable = better quality picture.
Digital stuff is actually far more annoying to fix. If your TV is black (not fuzzy, like it would be with a bad analog connection), you don't really know if it's the cable, the port, the video card, or something else.
But if you do, it isn't because the internet is bad and needs to be replaced (the cable in the analogy), it's because either the server or the client interpreted the signal incorrectly, and tried to display the page as correctly as possible, but failed.
The real problem though is that in my experience cable build quality simply doesn't correlate with price. All the cables are built at the same handful of east asian factories, and subject to the same variance. If some component supplier gets swapped (more brittle casings for the wire, say, or a different plastic formula in the injection molds) then you end up with a cable that will fail unexpectedly or intermittently.
For fun and profit: What I do when I order from monoprice is buy five or so at a time, which equals the price of a B&M cable, and then I sell my extras to friends for a buck or two over the monoprice cost, and then my cable is effectively free.
I understand the message of the article (that the $90 Monster cables are a scam) but the $1 skinny HDMI cable you got with your DVD player is not the same quality as the $10 one you picked up from MonoPrice, Amazon or Blue Jeans Cables (all 3 of my favorites for buying cables).
I don't know why, I am not an EE guy, I'm just saying after telling someone for the 200th time "Try this $10 cable from Amazon instead..." and having them come back with "It worked! The PS3 is fixed!", I'll just say all my personal experience suggests otherwise.
I am talking about fixing everything from "my colors look wrong" to "I have no picture!" with this recommendation.
I'd also point out that even at the ridiculously high end of cables where you are talking about gold-this and gold-that, to an average viewer there is no perceptible difference but there does seem to be a measurable difference in cable quality for really demanding runs[2], meaning YES there is a difference, but most people will never need/see/experience it unless you are doing a very long run.
[1] http://www.thebuzzmedia.com/ps3-hdmi-black-screen/
[2] http://www.thebuzzmedia.com/hdmi-cable-showdown-monster-mono...