I can’t imagine a permanent high energy install like a heater, shower, car charger, oven or heat pump would be 110v. If you plug in via a standard socket in europe you get about 3kW, which given european driving is probably fine overnight, but you’d want more than that in the US
It's really just our basic receptacles that are 15A or 20A @ 120V. This is plenty for 99.9% of uses, with the exception of some kitchen appliances that produce heat (e.g. a plug-in kettle.) If you bought a unit that required higher voltages and was rated for use in the US, you could always have an electrician wire a 240V circuit with one of the standard 240V receptacle types.
My oven is on a dedicated 30A circuit, but the dryer, washer, dishwasher, microwave, kettle are all on the same 32A circuit with individual 13A plugs and don’t trip it.
Indeed.
My heat pump is 3phase 230v/16A one, that's 11kW peak power, the pump itself is 5kW, though with the rest being a resistive heater. Car charging is similar as well 3phase is quite standard nowadays.
My understanding is that the US power supply is pretty similar to the one in Europe when it comes to delivery, and industrial equipment runs 3phase, 240v - something you can find at a lot (most new) homes in Europe.
I wonder if having higher voltages in the US might be adopted for higher power devices. 110-120V is just too low, including for car charging.