News for hackers. Stuff that matters.
Re:Bring Back Our Knobs: Analog vs. Digital (2009) by tuatoru on Saturday November 20, 2021 @02:03PM (#29290843)
> So what do product designers have against knobs? Several things. ...

Then the piece omits the two overwhelmingly important reasons: cost and reliability.

Knobs definitely are much better to use, but things with moving parts that stick out from the surface are not as reliable in population terms. Most people never have trouble, but that quintile that gives their stuff a hard time costs manufacturers a lot.

Re:Bring Back Our Knobs: Analog vs. Digital (2009) by YeBanKo on Saturday November 20, 2021 @02:39PM (#29291185)
That seems like a claim without data support. Cost, sure. Reliability, I doubt there is a difference in reliability within product lifecycle. My anecdotal experience: every car I owned had a knob for music volume. It never broke. Other things broke, sometimes making car repair economically unviable. But the knob did not break.
Re:Bring Back Our Knobs: Analog vs. Digital (2009) by Amezarak on Saturday November 20, 2021 @02:34PM (#29291129)
> but things with moving parts that stick out from the surface are not as reliable in population terms.

I would be really delighted to know if auto manufacturers in particular really have data on this, and what they count as a failure.

I've seen a lot more electronics failures than I have mechanical failures in cars and appliances, and the trend seems to stick with displays and knobs. For example, the first thing to break on my car was a display, which I still haven't fixed because it would be hundreds of dollars. I have an old truck with some broken knobs, but the posts they sat on still work, so they're still usable. If I did need to fix them I suspect it'd be a lot cheaper.

Color me skeptical that increasingly fancy touchscreen displays are going to have any staying power. This has always kind of smelled like it was simply based on a logical axiom that "less moving parts is better and more reliable" rather than practical reality in the late 2010s-2020s.

Re:Bring Back Our Knobs: Analog vs. Digital (2009) by bluedino on Saturday November 20, 2021 @02:10PM (#29290908)
I'll take knobs over membrane buttons. Can't believe the entire appliance industry switched.
Re:Bring Back Our Knobs: Analog vs. Digital (2009) by at_compile_time on Saturday November 20, 2021 @03:37PM (#29291624)
Appliances used to be way more reliable too. I grew up in the 90s with appliances from the 70s and 80s that still worked when they were replaced a few years ago. The new oven has already shit the bed and needs a new board.

Everything is more complicated than it used to be, more likely to break as a result, and requires specialized parts to fix. And if the manufacturer doesn't sell that part anymore, your stuck buying a new appliance. What a racket.

Re:Bring Back Our Knobs: Analog vs. Digital (2009) by monocasa on Saturday November 20, 2021 @04:35PM (#29292065)
Same. I bought a house recently, and the appliances are all from the early 90s except a couple from the late 50s. My parents asked when I'm going to replace them, and I reminded them that they've had to replace their oven twice in the past ten years because none of the new stuff works for any time period. Meanwhile my appliances are at their youngest old enough to be talking to their little appliance friends about their appliance 401k.
Re:Bring Back Our Knobs: Analog vs. Digital (2009) by Aloha on Saturday November 20, 2021 @11:24PM (#29294178)
While I don't really disagree with you, don't underestimate survivorship bias, how many of that old stuff died early and needed parts, yes the parts were cheaper, but the repairs took usually took more labor.
Re:Bring Back Our Knobs: Analog vs. Digital (2009) by Wistar on Saturday November 20, 2021 @02:43PM (#29291232)
High-end ovens, such as those above, say, $5k, almost always have knobs.

I sure appreciate tuning knobs on car audio systems but almost no one besides Toyota and Lexus offer them any more.

Re:Bring Back Our Knobs: Analog vs. Digital (2009) by SyzygistSix on Saturday November 20, 2021 @02:50PM (#29291273)
Old toaster oven took one action to change the temp - turn the knob. New toaster oven takes multiple actions to change the baking temperature. It's ridiculous.
Re:Bring Back Our Knobs: Analog vs. Digital (2009) by finnh on Saturday November 20, 2021 @03:02PM (#29291385)
Huh. When remodeling my kitchen in 2016 the highest priced ovens all had crappy touchscreens. I had to "downgrade" from Miele to Bosch to get knobs.
Re:Bring Back Our Knobs: Analog vs. Digital (2009) by jeffbee on Saturday November 20, 2021 @03:48PM (#29291707)
Yep. All the expensive electric cooktops have touch controls and were obviously designed by people who have never cooked anything in their lives, not even once. I got so fed up with mine that I had my gas cooktop re-installed, even though it was totally contrary to my personal GHG emissions goals.
Re:Bring Back Our Knobs: Analog vs. Digital (2009) by bluGill on Saturday November 20, 2021 @04:11PM (#29291882)
I've been holding off replacing an old stove I hate for that reason. If someone wants my thousand dollars they will make a stove that is easy to control.
Re:Bring Back Our Knobs: Analog vs. Digital (2009) by macNchz on Saturday November 20, 2021 @06:19PM (#29292681)
Yeah I have a relative who renovated their kitchen recently and got a fairly high end induction range with touch controls...it was quite expensive and has possibly the worst user experience of any appliance I've ever used.

As the touch areas get wet or oily they start to act weird, and they're right next to the cooking surfaces so they always get wet and oily if you're actually cooking anything. You have to lock the touch controls after using it because even a single drip of water can make it think you're doing some kind of invalid input and it'll start beeping loudly in the middle of dinner. Sometimes if you don't lock it it will start beeping endlessly in the middle of the night. After lots of back and forth it doesn't seem that this particular unit is defective, just the product itself is badly designed.

I love cooking on it when it works properly–the induction technology is amazing, but I will absolutely never buy one with out real knobs.

Re:Bring Back Our Knobs: Analog vs. Digital (2009) by jdr23bc on Sunday November 21, 2021 @12:10AM (#29294341)
That sounds like the appliance at my new place. It's got a wall mounted microwave / oven unit with touchscreen controls at the top. such a terrible design. whenever the appliance is in use and you open at door the controls get steamed up and become useless.

at least I can turn it on over WiFi (I have no idea what the use case for that feature is).

Re:Bring Back Our Knobs: Analog vs. Digital (2009) by Wistar on Sunday November 21, 2021 @01:46AM (#29294635)
I was thinking about DCS, Bertazzoni, American Range, Viking, Blue Star and even Hestan level stuff. Most of their ovens have knob based controls.
Re:Bring Back Our Knobs: Analog vs. Digital (2009) by destitude on Saturday November 20, 2021 @03:58PM (#29291783)
Even though I have a "last gen" Subaru Outback I would never replace it with a new one because they put in a huge center console screen and removed the knobs for climate control. What is odd is the Subaru Ascent actually has knobs for all of this.
Re:Bring Back Our Knobs: Analog vs. Digital (2009) by markdown on Saturday November 20, 2021 @03:43PM (#29291669)
I have a 2019 Toyota Hilux (called Tacoma's in the US) and it doesn't have any knobs or buttons at all.

However, the 2021 brought them back.

https://imgur.com/a/Qtfartc

Re:Bring Back Our Knobs: Analog vs. Digital (2009) by bitbckt on Saturday November 20, 2021 @04:52PM (#29292180)
A Hilux and Tacoma are two different vehicles: different engine options, different chassis, and almost zero interchangeable parts.

Try taking a Tacoma to a parts counter outside the US, or Hilux to one in the US, and you’ll just get blank stares.

Re:Bring Back Our Knobs: Analog vs. Digital (2009) by markdown on Saturday November 20, 2021 @05:23PM (#29292378)
Thanks for that. I've always just assumed it was just a rebrand plus cosmetic (body+interior) changes.
Re:Bring Back Our Knobs: Analog vs. Digital (2009) by throwaway0a5e on Saturday November 20, 2021 @08:19PM (#29293332)
Originally they sold the Hilux in the US but they realized that basically nobody who was buying one in the US needed that much truck right around the same time it became obvious they were gonna need to drop some serious coin on safety and emissions hence they just developed a new vehicle that was a better fit.
Re:Bring Back Our Knobs: Analog vs. Digital (2009) by genewitch on Saturday November 20, 2021 @04:32PM (#29292045)
As ghastly as that is, your uri is qt fartc.
Re:Bring Back Our Knobs: Analog vs. Digital (2009) by NikolaNovak on Saturday November 20, 2021 @05:46PM (#29292505)
I guess I don't have big-picture number. I have literally not had anybody replace a knob, ever. My car is 18yo and knobs are working fine.

Whereas, number of people in my immediate friends & family who had to replace $2500 touchscreens... I mean, I'm astonished that given temperature variations and sun and elements, touchscreens survive AT ALL.

Re:Bring Back Our Knobs: Analog vs. Digital (2009) by mojuba on Saturday November 20, 2021 @02:18PM (#29290964)
> Then the piece omits the two overwhelmingly important reasons: cost and reliability.

Plus that not all industrial designers can create great designs. Often times when I look at e.g. my Bosch electric cooktop I can only imagine its awful touch panel was an afterthought in the design process. It's so bad, awkward and hard to use, it makes me feel sorry for those who created this thing. And for all its users just as well.

Cost savings? I mean, you don't replace the car's steering wheel with a pair of buttons - like on the hilarious picture in the article - just to save on production costs.

Re:Bring Back Our Knobs: Analog vs. Digital (2009) by tuatoru on Saturday November 20, 2021 @02:21PM (#29290999)
No, you don't replace the steering wheel because that's safety critical and the superiority of the UI is overwhelmingly important. You don't get to sell the product at all with a defect like that, so the "cost to the manufacturer" is pretty big.

The entertainment system, or a phone? Not safety critical, no need to provide real-time interaction. Cost dominates.

Re:Bring Back Our Knobs: Analog vs. Digital (2009) by MereInterest on Saturday November 20, 2021 @05:20PM (#29292362)
My car has a physical knob for the volume, which can also be pushed in to disable the entertainment system entirely. If I need to turn off the radio in order to give full concentration to driving, I don't need to navigate through menus in order to turn it off. I'd consider that safety critical.
Re:Bring Back Our Knobs: Analog vs. Digital (2009) by mojuba on Saturday November 20, 2021 @03:48PM (#29291701)
Both your car stereo and your phone contribute to (un)safety during driving.
Re:Bring Back Our Knobs: Analog vs. Digital (2009) by AshamedCaptain on Saturday November 20, 2021 @05:18PM (#29292353)
There is a shitton of very crappy rotary encoders out there that attest to that.

For example, most microwaves I've seen that use knobs tend to wear them down pretty fast. Mine has a pretty much analog timer and just cannot be set for anything less than 1 min since it will randomly stop somewhere in the 0-60s interval due to wear.

A relative's oven has a digital relative rotary encoder, but again due to wear it tends to skip some positions from time to time. Meaning you'll rotate 180 degs and some days that will mean 30min, some days it will mean 10min, and then some other days it means 2 seconds. It also uses the same knob to set the RTC, and with the knob in such state it is so much of a chore they have basically succumbed to the 12:00 phenomena.

I am a big fan of "knobs" (specially compared to capacitive buttons) but these days they are no longer reliable at all.

Re:Bring Back Our Knobs: Analog vs. Digital (2009) by duped on Saturday November 20, 2021 @05:37PM (#29292461)
Automotive and aviation grade pots/encoders/switches are a different class of product and a good deal more expensive than the garbage they'll put on consumer electronics.
Re:Bring Back Our Knobs: Analog vs. Digital (2009) by koofdoof on Saturday November 20, 2021 @07:08PM (#29292965)
Sometimes that behaviour can be the result of a poorly written interrupt service routine that isnt reading the encoder pulses correctly. Ive found it to be a surprisingly common issue regardless of how new an item is.
Re:Bring Back Our Knobs: Analog vs. Digital (2009) by amonavis on Sunday November 21, 2021 @12:36AM (#29294429)
We own a car (Honda Accord), 1983 model. The light switches in our house date to the 1950's. Never has anything broken.
Re:Bring Back Our Knobs: Analog vs. Digital (2009) by SavantIdiot on Saturday November 20, 2021 @05:57PM (#29292565)
100+ years of knobs and the argument is "we still can't get it right"? I don't believe that.
Re:Bring Back Our Knobs: Analog vs. Digital (2009) by Kye on Saturday November 20, 2021 @06:16PM (#29292662)
A 100 year old knob is not a 50 or 25 year old knob. They're as different as the wheels on a horse carriage and the wheels on a Model T. They're not working from the same 100 year old design with the same expectations. Ford likely expected the crank handle knob to take some abuse.
Re:Bring Back Our Knobs: Analog vs. Digital (2009) by SavantIdiot on Saturday November 20, 2021 @07:42PM (#29293123)
I don't understand the point of this comparison: I sounds like you're assuming I don't realize a knob from 50 years ago is different form one today. Are you aware how dismissive that tone is? The point is we've had 100 years to make the better, and the claims from automakers that they break too easily doesn't hold water.