Ask HN: Anyone want to buy me a TRS-80 so I can make a sculpture of it?

Posted by pkdpic on Thursday November 04, 2021 @01:51PM
from the ask-hn dept.

I've been making concrete sculptures of computer history hardware and would really like them to continue to be as accurate as possible but I can't find any good resource on the dimensions of the first generation TRS-80. I'm not quite a tech millionaire but if someone wanted to impulsively buy this thing for me I could make a really fantastic sculpt of it: https://www.ebay.com/itm/255205656532.

Some examples of what I've sculpted so far --> https://tombetthauser.github.io/societyofobjects/images/

( 18 comments | 18 points | on HN )

Re:Ask HN: Anyone want to buy me a TRS-80 so I can make a sc... by IndexCardBox on Thursday November 04, 2021 @03:44PM (#29111677)

Wouldn't you be more likely to get a response asking "If anyone has a TSR 80 can you provide me measurements and I'll send you a sculpture of it free of charge" rather than "give me $600 just because"

[ Parent | on HN ]

Re:Ask HN: Anyone want to buy me a TRS-80 so I can make a sc... by pkdpic on Thursday November 04, 2021 @04:21PM (#29112095)

Absolutely, that would probably be more fun too in terms of dialogue too ;)

Upon further reflection it might be even cooler to donate it to a computer museum.

[ Parent | on HN ]

Re:Ask HN: Anyone want to buy me a TRS-80 so I can make a sc... by boulos on Friday November 05, 2021 @12:37AM (#29115514)

Since we're now talking about "get a really accurate set of measurements", are you actually saying "Can someone get to the Computer History Museum and do some serious photogrammetry of [1] when they reopen?" (Or maybe [2] or one of their other artifacts)

[1] https://www.computerhistory.org/collections/catalog/10263098...

[2] https://www.computerhistory.org/collections/catalog/10276629...

[ Parent | on HN ]

Re:Ask HN: Anyone want to buy me a TRS-80 so I can make a sc... by aksss on Thursday November 04, 2021 @03:52PM (#29111766)

What about using some 3D models as your reference?

I’m sure you’re after a model 100 but here’s a link as an example. https://sketchfab.com/3d-models/trs-80-color-computer-2-865e...

[ Parent | on HN ]

Re:Ask HN: Anyone want to buy me a TRS-80 so I can make a sc... by pkdpic on Thursday November 04, 2021 @04:27PM (#29112166)

Omg yes, those are the best resources when people have gone full tilt on accuracy. Unfortunately I found several that ended up not being very accurate when I tried to confirm with relative photo measurements. But yeah if you know of any more good 3D models send em my way!

[ Parent | on HN ]

Re:Ask HN: Anyone want to buy me a TRS-80 so I can make a sc... by HeyLaughingBoy on Thursday November 04, 2021 @05:01PM (#29112484)

Oh, if you knew the memories that brings back. At my first job, we had shelves of these things that we used for hardware testing. The owner had bought about 20 of them at auction dirt cheap. If one blew up, we just tossed it in the dumpster and pulled another off the shelf.

Unfortunately, I can't help you with dimensions.

[ Parent | on HN ]

Re:Ask HN: Anyone want to buy me a TRS-80 so I can make a sc... by pkdpic on Thursday November 04, 2021 @05:23PM (#29112703)

As someone who didn't get to live through that era I'm always inspired by stories like this.

Would love to send you one when Im done!

[ Parent | on HN ]

Re:Ask HN: Anyone want to buy me a TRS-80 so I can make a sc... by HeyLaughingBoy on Thursday November 04, 2021 @07:15PM (#29113609)

Thank you for your very generous offer. However, I'm not much of a collector, so it should probably go to someone who would appreciate it more.

[ Parent | on HN ]

Re:Ask HN: Anyone want to buy me a TRS-80 so I can make a sc... by pkdpic on Thursday November 04, 2021 @08:31PM (#29114134)

No worries, but seriously once theyre sculpted I can crank out the concrete casts by the dozens. And theyre 1:6 (Barbie) scale so no insane space cost. In any case I really want them to go to folks workin in tech but no pressure : )

[ Parent | on HN ]

Re:Ask HN: Anyone want to buy me a TRS-80 so I can make a sc... by sincerely on Thursday November 04, 2021 @03:52PM (#29111756)

Maybe offer to give the TRS-80 back to whoever bought it once you finish the sculpture?

[ Parent | on HN ]

Re:Ask HN: Anyone want to buy me a TRS-80 so I can make a sc... by pkdpic on Thursday November 04, 2021 @04:21PM (#29112103)

Heck yeah, plus a concrete cast of the sculpture!

[ Parent | on HN ]

Re:Ask HN: Anyone want to buy me a TRS-80 so I can make a sc... by WalterGR on Thursday November 04, 2021 @02:00PM (#29110477)

Where have you gotten the dimensions of the hardware you’ve previously sculpted?

[ Parent | on HN ]

Re:Ask HN: Anyone want to buy me a TRS-80 so I can make a sc... by pkdpic on Thursday November 04, 2021 @02:09PM (#29110595)

Mostly random aficionado sites confirmed by separate sites and / or relative photo measurements. Surprisingly very few contradictions ended up occurring. But I intentionally started with extremely popular hardware with thousands of potential photo references.

[ Parent | on HN ]

Re:Ask HN: Anyone want to buy me a TRS-80 so I can make a sc... by WalterGR on Thursday November 04, 2021 @02:17PM (#29110689)

How concerned are you about accurately replicating curves?

I’m asking because I’ve been wanting to get into making replicas! :)

[ Parent | on HN ]

Re:Ask HN: Anyone want to buy me a TRS-80 so I can make a sc... by pkdpic on Thursday November 04, 2021 @04:24PM (#29112136)

Definitely concerned, especially since the first gen iMac is forsure on my todo list. But I generally find you can get curves without too much trouble by getting the endpoints and the climax of the curve measured in a triangle and then winging it for the inbetweens.

Also would love to see what youre working on when you get rolling!

[ Parent | on HN ]

Re:Ask HN: Anyone want to buy me a TRS-80 so I can make a sc... by potta_coffee on Friday November 05, 2021 @01:11PM (#29122077)

TRS-80 was my first computer and I've been looking for one for years. Anyone want to give me one so I can code on it?

Is the sculpting process destructive to the machine in question?

[ Parent | on HN ]

Re:Ask HN: Anyone want to buy me a TRS-80 so I can make a sc... by dang on Thursday November 04, 2021 @02:32PM (#29110860)

(I've converted your submission to a text post so it will show up on /ask. Hope that's ok.)

[ Parent | on HN ]

Re:Ask HN: Anyone want to buy me a TRS-80 so I can make a sc... by pkdpic on Thursday November 04, 2021 @04:27PM (#29112169)

Excellent, thank you!

[ Parent | on HN ]