Re:Why Carmakers Can’t Transition to Newer Chips
by pwg on Saturday October 02, 2021 @01:36PM
(#28730388)
Except that in some cases, the automakers are not using a CPU with external interface hardware, they are using microcontrollers similar to the PIC series, example here: https://ww1.microchip.com/downloads/en/DeviceDoc/40300C.pdf (Note, I'm not suggesting they use these exact chips, this is just an example of the level of onboard integration that is available for micro-controller chips).
Single chip system, with built in analog comparators, timers, signal capture and PWM generation module, serial UART, etc. I.e., a whole "system on a chip" with the external world interfaces already built into the chip. Changing one of these for an ARM CPU with external analog comparators, timers, PWM modules, serial UART's, etc., is a redesign effort, not just a "change the chip" effort. If the clock speed possible via the internal clock oscillator is sufficient, then this chip needs only +5V and ground (plus programming) to be able to interface to and control some external analog or digital equipment.
Single chip system, with built in analog comparators, timers, signal capture and PWM generation module, serial UART, etc. I.e., a whole "system on a chip" with the external world interfaces already built into the chip. Changing one of these for an ARM CPU with external analog comparators, timers, PWM modules, serial UART's, etc., is a redesign effort, not just a "change the chip" effort. If the clock speed possible via the internal clock oscillator is sufficient, then this chip needs only +5V and ground (plus programming) to be able to interface to and control some external analog or digital equipment.