News for hackers. Stuff that matters.
Re:VPN users unmasked by zero-day vulnerability in Virgin Me... by deanclatworthy on Monday September 20, 2021 @08:27AM (#28593062)
You can take those routers and use it as a modem only. Then put your own router in front of it.
Re:VPN users unmasked by zero-day vulnerability in Virgin Me... by stordoff on Monday September 20, 2021 @09:16AM (#28593454)
I haven't tried it myself, but this chain of comments at /r/netsec[1] suggests it doesn't help:

> I'm guessing a workaround is to use a 3rd party router and block traffic to 192.168.100.1 which is the IP of the management UI when in modem only mode, presumably the external IP can still be retrieved in modem only mode

> If it's still active in modem-only mode, it essentially precludes use of these routers entirely for any sensitive comms.

> The web interface is still available in bridge mode with Liberty Global's Arris modems, yes.

> Just tried it on my device in modem-mode and it does indeed still expose the snmpGet endpoint. As suggested above, i've firewalled all traffic to 192.168.100.1 on my own firewall.

[1] https://www.reddit.com/r/netsec/comments/pnzs0n/silently_unm...

Re:VPN users unmasked by zero-day vulnerability in Virgin Me... by buggeryorkshire on Monday September 20, 2021 @08:28AM (#28593072)
It's still not really modem-only mode. They do routing in there, mainly for their management layer.
Re:VPN users unmasked by zero-day vulnerability in Virgin Me... by Semaphor on Monday September 20, 2021 @09:00AM (#28593316)
I must admit, I don’t know much about networking. But do you have some more information there? My German cable router is in modem-mode, and I’d be interested in knowing what kind of routing it still does.
Re:VPN users unmasked by zero-day vulnerability in Virgin Me... by lxgr on Monday September 20, 2021 @09:28AM (#28593550)
DOCSIS networks usually assign some management IP address that the provider can access to perform remote diagnostics on the modem directly. It's usually invisible and inaccessible to the user.

Also, in many cases there is a specific that the "modem" listens on, serving a web interface that allows switching back to "router" mode. This also wouldn't be possible with a "pure" modem (as it shouldn't have any concept of the IP layer).

Re:VPN users unmasked by zero-day vulnerability in Virgin Me... by Semaphor on Monday September 20, 2021 @09:53AM (#28593792)
That makes sense. After all, I weirdly had to use their webinterface to even put it into modem mode. Thanks.

Though now that I’m thinking of it, are you sure it uses IP? It’s not as if they can’t use other layers.

Re:VPN users unmasked by zero-day vulnerability in Virgin Me... by LilBytes on Monday September 20, 2021 @10:29AM (#28594177)
Can't speak for all Telco's but in Australia, DOCSIS modems are registered by their MAC address on the modem it's self. Not by IP address.

I can't imagine this is different else where so it's likely the replying comment above yours is incorrect.

Source: I was previously a network engineer for a national Telco.

Other sources: DOCSIS 3.0 registration info: https://volpefirm.com/docsis-3-0-cable-modem-registration/

Re:VPN users unmasked by zero-day vulnerability in Virgin Me... by dangerface on Monday September 20, 2021 @12:04PM (#28595302)
Virgin used to just use the mac address with their old modems, you could flash the firmware and change the mac so you could buy their cheapest package and flash the mac of a modem with unlimited gbit internet. They craked down on that a few years ago tho so I don't think this is possible anymore.
Re:VPN users unmasked by zero-day vulnerability in Virgin Me... by lxgr on Monday September 20, 2021 @12:19PM (#28595481)
Modern DOCSIS also uses certificate-based authentication.

Only the owner of a given MAC OUI is able to create a certificate covering MACs under it that will be accepted by the CMTS.

Re:VPN users unmasked by zero-day vulnerability in Virgin Me... by lxgr on Monday September 20, 2021 @12:18PM (#28595467)
Registration/network access and management are two different things, no?
Re:VPN users unmasked by zero-day vulnerability in Virgin Me... by LilBytes on Monday September 20, 2021 @01:15PM (#28596179)
Not always, with Telstra the MAC address was also responsible for authentication.

Though I believe it's since changed, my last interaction with DOCSIS was 4-5 years ago. I seem to recall there's a captive portal involved now but previously it was solely MAC.

Re:VPN users unmasked by zero-day vulnerability in Virgin Me... by thrashh on Monday September 20, 2021 @11:23AM (#28594800)
Note that even many actual DOCSIS modems have management interfaces and are not pure.

I have always been able to view the management page for my Arris/Motorola Surfboard modems.

Re:VPN users unmasked by zero-day vulnerability in Virgin Me... by gruez on Monday September 20, 2021 @08:31AM (#28593098)
But that's fine right? If your ISP wants to send you bad packets having your own equipment isn't going to stop them either
Re:VPN users unmasked by zero-day vulnerability in Virgin Me... by kevin_thibedeau on Monday September 20, 2021 @08:37AM (#28593144)
Which then burdens you with a double NAT which shouldn't ever be necessary if the industry had their shit together.
Re:VPN users unmasked by zero-day vulnerability in Virgin Me... by nly on Monday September 20, 2021 @08:45AM (#28593189)
No you don't. In modem mode the VM routers only issue a single IP (the internet facing IP) over DHCP to a single host (your router)
Re:VPN users unmasked by zero-day vulnerability in Virgin Me... by guipsp on Monday September 20, 2021 @09:02AM (#28593329)
Fwiw not all modems support this (and some do but the ISPs disable it).
Re:VPN users unmasked by zero-day vulnerability in Virgin Me... by mugsie on Monday September 20, 2021 @10:16AM (#28594008)
Virgin Media allows you to use "modem mode" on their service, which is great, because it also turns off the CGNat crap, and gives you a real IPv4 address via DHCP on your own equipment