News for hackers. Stuff that matters.
Re:How to properly load a dishwasher (2020) by mschuster91 on Wednesday September 08, 2021 @10:03AM (#28457149)
> The idea of leaving half-washed food waste in the machine and recirculated for a whole month also doesn't appeal to me. But perhaps that's just me.

Unless there are actual solids (=bones, remains of stickers on glasses that contain plastics) in there, the combination of heat and extreme alkality of the washing water will dissolve just about anything over time so that it passes through the filter and gets pumped out.

Re:How to properly load a dishwasher (2020) by joezydeco on Wednesday September 08, 2021 @10:09AM (#28457241)
The common service call for Bosch dishwashers is "will not drain", and the common fix is to pull out the completely clogged filter and clean it as seen in the video above. The evidence doesn't support the idea that the material eventually dissolves out of the filter.

Secondly, the final rinse water is filled into the tub and recirculated over the same filter. It's not directly sprayed from the water supply over the dishes and into the drain.

Re:How to properly load a dishwasher (2020) by dekhn on Wednesday September 08, 2021 @03:24PM (#28461854)
The difference between theory and practice in Bosch machines is very large. They don't really work that way, in my experience. Instead, the whole filter complex ends up with a huge gooey mess that clogs the whole filter.
Re:How to properly load a dishwasher (2020) by jfk13 on Wednesday September 08, 2021 @05:12PM (#28463128)
As a (satisfied) Bosch dishwasher owner, I don't recognise this description. Offhand I can't even remember when I last cleaned the filter. Meanwhile, it just keeps working.
Re:How to properly load a dishwasher (2020) by c0nsumer on Thursday September 09, 2021 @07:22AM (#28468486)
This morning, not long after reading most of this thread, I went to empty my Bosch dishwasher. It's just shy of a year old, and was a huge upgrade from the 25 year old Maytag it replaced. I keep being concerned about the filter, and hadn't checked it in a few months, and the only thing in there was a dozen or so dog hairs.

Really surprised me because dishes get scraped and dog-licked, but there's definitely plenty of solids that go into the wash. Seems like the detergent (basic Powerball solid things) and hot water are doing what it's supposed to.

The main complaints I read about it were how slow it is. At ~2:45 for a cycle that is a while, but it doesn't really matter. If I start it after a meal it's done well before I'm getting ready for the next. Run it overnight, done by morning.

As opposed to my old dishwasher which was ~45 minutes and noisy and sounded super powerful, I think the long wash cycle is key to modern dishwashers. I believe they basically soak/flood everything over time, letting them chemicals do their job, and the less force means it's quieter. Couple that with a bunch of insulation and the result is something more efficient that works well, at the (completely acceptable) expense of time.

Re:How to properly load a dishwasher (2020) by joezydeco on Thursday September 09, 2021 @01:11PM (#28472030)
A lot of that 2:45 time is the drying cycle, which uses the latent heat in the dishes to (hopefully) evaporate water off the dishes and condense on the cooler inside of the tub.

I'm a bit more interested in the newer Bosch models that are using a zeolite bed to dry the dishes. The catalyst generates heat and absorbs moisture at the same time, then is renegerated during the wash.