Faraday was the first to demonstrate an actual physical process where electrical energy was converted to mechanical energy.
It's turtles all the way down.
In the early days of electricity research, static electricity was more common than "current" electricity. There were early static-based telegraph experiments that predated Morse [2] and used a silk thread as a conductor. Before the electromagnet was invented, people didn't know how to build an indicator based on electric current - one concept was to use electrolysis and look for bubbles.
[1]: https://hackaday.com/2017/10/03/ben-franklins-weak-motor-and...
[2]: https://physicstoday.scitation.org/doi/full/10.1063/PT.3.307...
Its such a simple thing but no one had thought of a reason to do such a thing.
What happened to the compass shocked the world and triggered Faradays many beautiful experiments.
Marginally related: it was quite a shock to me when I first learned a rocket engine's thrust can be PWM-controlled.
The thrust of the pistons of a steam locomotive is PWM-controlled. That's what all the elaborate levers and cranks on the side of the locomotive do. They control the "cutoff" point in the cycle, where steam is turned off. Look up "valve gear" if interested.
"“Switched Reluctance motor, using permanent magnets.” ...“Tesla calls it a PMSRM, Permanent Magnet Switched Reluctance Motor."
https://cleantechnica.com/2018/03/11/tesla-model-3-motor-in-...
This combination has been used for many decades in the so-called hybrid stepping motors, where "hybrid" means that both PM and SR are used.
In the case of stepping motors, the advantage of the combination is to provide in the same motor both very small steps and also a static torque, i.e. the motor can maintain a position even without the power supply.
Side tangent: would you say your education overall gave you a good base to build on? If yes, what sort of curriculum were you taken through?
Rotating electrical machinery was considered a solved problem and kind of boring until about 20 years ago. Then people started using semiconductor switches to drive electric motors. Classic theory assumed you were driving motors with a sine wave. Motor controllers tried to make motors happy by providing a sine wave, or something close to one. Gradually it was realized that motors could be purpose designed for chopped waveforms. This broke all that beautiful closed-form math and charts on polar graph paper that goes back to Tesla. You have to simulate to design a modern electric car motor.