News for hackers. Stuff that matters.
Re:O.mg Cable by gruez on Thursday September 02, 2021 @05:41PM (#28397721)
>putting my own desktop in a steel cage with a good lock proved effective against retaliation.

>Then we moved on to attacking the firmware in each others keyboards.

In what world is hacking keyboard firmware easier than lockpicking?

Re:O.mg Cable by michaelt on Thursday September 02, 2021 @06:28PM (#28398188)
I once saw a PC security case where instead of the lock cylinder retracting a bolt, it turned a screw thread and opened the case by about half a millimeter. It took the guy unlocking it a good fifty turns to get the PC out of it.

And there were two - one on each side. What's more, it was a tubular lock, so if you were single-pin picking you'd have to pick it 5 times per rotation.

Nothing that would stand up to a battery powered angle grinder, of course.

Re:O.mg Cable by lrvick on Thursday September 02, 2021 @06:46PM (#28398321)
I don't know anyone that would SPP a tubular lock in the field.

$40 for tools designed to pick all pins at once and make a "key" with some quick impressioning motions.

Some do have spool pins. In those cases you will need manual fiddling to pick it once then you have a key to keep spinning.

Still, sounds like an interesting design. Link?

Re:O.mg Cable by michaelt on Thursday September 02, 2021 @07:13PM (#28398520)
I was under the impression impressioning relied on all the lock's springs and driver pins being identical, and that better tubular locks avoided that?

I looked for a picture of the case but couldn't find one. I was in that college CAD lab... quite a long time ago.

Re:O.mg Cable by Zenbit_UX on Sunday September 05, 2021 @10:34AM (#28424631)
Tubular locks are trivial to pick and the lock turning the screw mentioned above would be just as simple with a tubular pick than with the original key.
Re:O.mg Cable by lrvick on Thursday September 02, 2021 @06:38PM (#28398255)
In a world where I am the one choosing the locks.

I taught everyone else involved to lockpick in the first place and chose locks well beyond any of our skill levels to pick.

Re:O.mg Cable by jayd16 on Thursday September 02, 2021 @06:30PM (#28398198)
It's a gentleman's sport.
Re:O.mg Cable by dharmab on Friday September 03, 2021 @12:04AM (#28400311)
In a world where keyboards are open source programmable devices: https://qmk.fm/
Re:O.mg Cable by Godel_unicode on Thursday September 02, 2021 @06:34PM (#28398218)
In the world where one is a firmware exploit developer and don't know how to pick locks...?
Re:O.mg Cable by lrvick on Thursday September 02, 2021 @06:47PM (#28398331)
We were all capable of both and had to plan accordingly.
Re:O.mg Cable by mhh__ on Friday September 03, 2021 @12:27AM (#28400402)
If you don't know how to pick a lock it's a lot easier. I assume I could learn but I know a lot more about firmware than barrels.
Re:O.mg Cable by jimmySixDOF on Thursday September 02, 2021 @06:16PM (#28398061)
and what's this site we are on's name again ?
Re:O.mg Cable by Forge36 on Thursday September 02, 2021 @05:54PM (#28397866)
Harder to spot visibly?
Re:O.mg Cable by mijoharas on Friday September 03, 2021 @05:39AM (#28402137)
software problem, not a hardware problem. :)