Re:Apple iPhone charger teardown: quality in a tiny expensiv...
by flyinghamster on Wednesday August 04, 2021 @08:57AM
(#28060477)
Yikes. 240W through that tiny connector?
> The most troublesome potential is the combination of PD controller bugs on the charger side leading to 48V/5A on the cable, and a lack of protection circuitry on the side of a device that has been designed for 5V-only.
Double yikes. I always thought that if you're going to put radically different voltages through ports, they should have different-enough connectors that you can't plug one into the other. I guess I'm old-fashioned.
I get the desire to end the connector conspiracy and just have One Connector to Rule Them All, but in the end we've just created another connector conspiracy, especially when you throw Thunderbolt into the mix.
Given that USB-C PD's EPR upgrade will allow 48V @ 5A for a total of 240W of power, the potential for a fire due to shoddy (too thin/fraudulent or damaged) cables, dirt or loose solder connections on the sockets (causing high resistance and thus heat build-up at the spot) is not negligible.
The most troublesome potential is the combination of PD controller bugs on the charger side leading to 48V/5A on the cable, and a lack of protection circuitry on the side of a device that has been designed for 5V-only.