Re:Apple iPhone charger teardown: quality in a tiny expensiv...
by Causality1 on Tuesday August 03, 2021 @08:05PM
(#28055789)
The Switch violates protocol in many ways: https://web.archive.org/web/20190201011444/https://plus.goog...
Re:Apple iPhone charger teardown: quality in a tiny expensiv...
by duskwuff on Wednesday August 04, 2021 @02:58AM
(#28058058)
From what I'm reading, most of the violations Nathan is complaining about are on the part of Nintendo's dock, not the Switch itself. Moreover, these violations are all relatively minor (especially compared to Nyko's 9V CC howler!) and are unlikely to cause any serious issues under normal use.
Re:Apple iPhone charger teardown: quality in a tiny expensiv...
by kergonath on Wednesday August 04, 2021 @06:32AM
(#28059401)
The point was not whether the implementation in the Switch was perfect, it was about frying the console. Minor spec violations won’t do that, but a wildly out-of-spec charger might.
Re:Apple iPhone charger teardown: quality in a tiny expensiv...
by InitialLastName on Tuesday August 03, 2021 @08:13PM
(#28055851)
> The Switch was fine. The fault was entirely in the dock.
... and now those of us who design things with USB-C ports have a very clear market study in "should we shell out the $ to protect the CC pins against a short to VBUS?"
Re:Apple iPhone charger teardown: quality in a tiny expensiv...
by mschuster91 on Wednesday August 04, 2021 @04:15AM
(#28058539)
Out of random interest, how would one go to do that? Zener diodes?
Re:Apple iPhone charger teardown: quality in a tiny expensiv...
by Kirby64 on Wednesday August 04, 2021 @03:24PM
(#28065115)
Zener diodes will burn out mighty quickly if shorted to an actual supply. Would help for a leakage path, but an actual short you need a real solution.
That said, the Switch dock issue is due to poor implementation... not an accidental short.
Re:Apple iPhone charger teardown: quality in a tiny expensiv...
by InitialLastName on Wednesday August 04, 2021 @02:12PM
(#28064296)
There were a few specialized IC solutions floating around for this when the max VBUS was at 20V, but now that the 2.1 spec brings it up to almost 50V, it's not clear what the best answer will be.
Simple: an early third-party dock for the Switch, made by Nyko, implemented USB-C incorrectly and could deliver up to 9V on the CC1/CC2 (configuration channel) pins. These pins are only supposed to have 5V on them, and a USB-C interface IC in the Switch was frequently damaged by that voltage.
The Switch was fine. The fault was entirely in the dock.