News for hackers. Stuff that matters.
Re:Arduino Pro hardware is not open-source hardware by wmf on Wednesday July 07, 2021 @06:25PM (#27766450)
Did anyone notice or care that RPis aren't open source?
Re:Arduino Pro hardware is not open-source hardware by caslon on Wednesday July 07, 2021 @06:41PM (#27766586)
The FSF has been on that case for a while now.

https://www.fsf.org/blogs/sysadmin/single-board-computer-gui...

> In many geeky circles, single-board computers are popular machines. SBCs come in small form factors and generally run GNU/Linux, but unfortunately, many boards like the popular Raspberry Pi are dependent on proprietary software to use. The Free Software Foundation maintains a list of system-on-chip families, sorted by their freedom status.

Re:Arduino Pro hardware is not open-source hardware by wmf on Wednesday July 07, 2021 @06:46PM (#27766634)
That's talking about software but I'm wondering about open source hardware. Is it even a good idea? It allows clones to suck out the money needed to design the next generation, and for what benefit?
Re:Arduino Pro hardware is not open-source hardware by bscphil on Wednesday July 07, 2021 @07:14PM (#27766838)
If that's the goal, why not publish full schematics under a non-commercial license? No, it wouldn't be "open source" according to OSI / FSF, but most people would be happier about it than the status quo.
Re:Arduino Pro hardware is not open-source hardware by duskwuff on Wednesday July 07, 2021 @06:49PM (#27766651)
Open-sourcing the Raspberry Pi hardware would simply be irrelevant. You can't purchase BCM283x series SoCs, nor the other Broadcom parts on the board, without a purchasing agreement with Broadcom.
Re:Arduino Pro hardware is not open-source hardware by OJFord on Wednesday July 07, 2021 @08:39PM (#27767347)
And the agreement probably says you will not open source your hardware.
Re:Arduino Pro hardware is not open-source hardware by ohazi on Wednesday July 07, 2021 @06:32PM (#27766515)
Not only does the RPi foundation not release any board files for the RPi (fine, whatever), their "abbreviated schematic" is insultingly sparse [0].

The processor, memory, microSD card socket, Wi-Fi chip, USB hub chip, and Ethernet controller chip are all missing. If all you can get out of it is the pinout of the HAT and video connectors, then why did they even bother?

[0] https://www.raspberrypi.org/documentation/hardware/raspberry...

Re:Arduino Pro hardware is not open-source hardware by Salgat on Wednesday July 07, 2021 @07:21PM (#27766887)
On top of that, a hobbyist can't even buy the Raspberry Pi SoCs. It's complete vendor lock-in and a dead-end as far as I'm concerned.
Re:Arduino Pro hardware is not open-source hardware by bloggie on Wednesday July 07, 2021 @06:33PM (#27766522)
Yes...? There is plenty about them that is not open source: hardware, drivers, etc. Even the Broadcom docs are typically only available under license.
Re:Arduino Pro hardware is not open-source hardware by goodpoint on Thursday July 08, 2021 @09:06AM (#27771413)
Re:Arduino Pro hardware is not open-source hardware by pabs3 on Wednesday July 07, 2021 @11:03PM (#27768079)
Yes, and some folks are reverse engineering their stuff:

https://github.com/librerpi/rpi-open-firmware/

Re:Arduino Pro hardware is not open-source hardware by slenk on Wednesday July 07, 2021 @10:54PM (#27768035)
I don't actually see anywhere that they claim to be open source?
Re:Arduino Pro hardware is not open-source hardware by ineedasername on Wednesday July 07, 2021 @09:25PM (#27767595)
Yes, people have complained about it for years.