Re:Recovering “lost” treasure-filled floppy discs with an os...
by userbinator on Tuesday May 18, 2021 @09:41AM
(#27194404)
I found out how to use a vendor-specific command to read the raw data from the buffer of the drive before descrambling and ECC. Look up the "FriiDump" project for some more background information. I then patched the firmware in memory (that took a lot of work...) to cause regular read commands to return the raw data.
(Contrary to some of the other comments in this thread, the drive was actually an LG.)
Re:Recovering “lost” treasure-filled floppy discs with an os...
by dataflow on Tuesday May 18, 2021 @04:09PM
(#27200345)
Wow! It does sound extremely painful haha. Thanks for sharing, that's pretty useful info.
Re:Recovering “lost” treasure-filled floppy discs with an os...
by account42 on Tuesday May 18, 2021 @08:30AM
(#27193713)
What data you can get depends on the disc drive. DiscImageCreator [0] or the redump.org wiki [1] are good starting points.
Re:Recovering “lost” treasure-filled floppy discs with an os...
by vardump on Tuesday May 18, 2021 @04:54AM
(#27192524)
I'd also like to know. I tried to send those commands (SCSI I think?) to the drive, but it seemed to just ignore them. Heck, it seemed to ignore a huge portion of the different commands I tried to send it.
Re:Recovering “lost” treasure-filled floppy discs with an os...
by philpem on Tuesday May 18, 2021 @05:13AM
(#27192613)
Sounds like "READ RAW". From memory it only works on certain drives - I want to say LiteOn but my memory is hazy.
Re:Recovering “lost” treasure-filled floppy discs with an os...
by azalemeth on Tuesday May 18, 2021 @05:58AM
(#27192855)
That matches with my recollection too. I remember getting a specific model of a LiteOn drive specifically to ensure that I had the ability to do this, both for data recovery and because some forms of copy protection abused disc read errors and made reading your own CDs a (kernel blocking) pain under linux. I think the source of `cdparanoia` [1] has some good examples.
How did you do this? Is there some SCSI/ATAPI command for this?