The S54 is also notorious for VANOS issues and cam drive failures. I had to replace the solenoid pack on mine but elected to not upgrade the drive while I was in there.
4AGE is 4cyl 11:1 compression producing 155hp with 7200rpm redline.
S85 is 10cyl 12:1 compression producing 500hp with 8250rpm redline.
I am curious if there is proof to this. I've always felt the same way. I know in the "old days" with iron pistons, if you you simply started up a cold motor and and drove it hard without a warm up period, the pistons would expand quicker than the block and would start to scour the walls and/or lock up.
But other than that, the only other "proof" I have is from people in high school that like clock work at 3:30 everyday, would smoke tires leaving the parking lot everyday. They seemed to go through motors every 6 months. I'm talking knocking bearings and lifters cracked in half. I've never gotten rough with anything I own until after a 20 minute "warm up" and all has been well (so far).
You don't really hear about those other engines much because their buyers understand that a race engine needs more maintenance than any other road car.
Also, not beating on the engine until oil has warmed up to temp will elongate the bearing lifespan quite a bit. I have a friend with E60 6mt S85 that has factory bearings at 110k mi and has perfect oil analysis results.